INSTRUCTIONS FOR:
VACUUM SYSTEM TEST KIT
Model No:
VS400
3
Familiarise yourself with the applications and limitations, as well as any potential hazards, of the kit.
3
Keep this product in good working order and condition
(take immediate action to repair or replace damaged parts).
3
Use approved parts only
(unapproved parts may be dangerous and will invalidate the warranty).
3
Wear approved eye protection. Contact your Sealey dealer for details.
3
Keep children and unauthorised persons away from the work area.
3
Keep work area clean and tidy and free from unrelated materials.
3
Ensure the work area has adequate lighting.
7
DO NOT
use the kit to perform a task for which it is not designed.
7
DO NOT
allow untrained persons to use the kit.
7
DO NOT
use whilst under the influence of drugs, alcohol or intoxicating medication.
3
After use, clean equipment, place in case and store in a cool, dry, childproof area.
3
Dispose of waste liquids in accordance with local authority regulations.
p
WARNING! DO NOT
pollute the environment by allowing uncontrolled discharge of fluids.
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT!
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS
AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE
TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.
2. CONTENT
1. SAFETY INSTRUCTIONS
Check the contents of the case against the list below. If any item is missing or damaged contact your supplier immediately.
A - Vacuum Gun and Gauge
E - Sealing Lid (container)
I - Tube End Cones x 6
B - Vented Cap
F - Extension Tubes, 1/4ID x 2, 1/8ID x 2
J - Gun Cones x 2
C - 24 x !/4ID Tubing x2
G - Bleed Nipple Adaptors x 3
K - Tube Adaptor
D - Fluid Container
H - Suction Cup
L - Hose Cone
VS400 - 0021 - (1) - 181000
