INSTRUCTIONS FOR:
UNDER VEHICLE ENGINE/GEARBOX
SUPPORT
PART NO:
VS0110
Refer to
Instruction
Manual
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions
and maintained properly, give you years of trouble free performance.
Ensure that the engine support is in good working order. Take action for immediate repair or replacement of damaged parts.
Use genuine parts only. The use of unauthorised parts may be dangerous and will invalidate the warranty.
Locate the vehicle in a suitable, well lit work area.
Keep work area clean and tidy and free from unrelated materials.
Ensure the vehicle handbrake is engaged and the engine/motor is switched off.
Ensure all non-essential persons keep a safe distance whilst the engine support is in use.
DO NOT
use the engine support if damaged.
DO NOT
allow untrained persons to operate the engine/gearbox support.
DO NOT
use the support for purposes other than that for which it is designed.
DO NOT
exceed the rated capacity of the engine support.
WARNING:
Ensure that the vehicle structure being used to anchor the support is in sound condition.
When not in use, store engine support in a safe, dry, childproof area.
IMPORTANT:
These instructions are provided as a guide only. Always refer to the vehicle manufacturer’s service instructions, or a proprietary
manual, to establish the current procedure and data.
WARNING: The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations that may occur.
It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied by the
operator.
1. SAFETY
2. INTRODUCTION
3. SPECIFICATION
Designed to support the engine or gearbox when mountings or gearbox are being removed. Ideal when replacing clutches or timing belts.
Removes the need for using a transmission jack or engine support beam. Fully adjustable, making the unit suitable for most transverse and in-line
configurations. Fitting is by suspending underneath the vehicle by support hooks and counter-balancing against the underside of the vehicle.
Model No:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VS0110
Width: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 560mm
Min/Max Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 645/965mm
Capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300kg
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10kg
VS0110 Issue:1 - 14/09/15
Original Language Version
© Jack Sealey Limited
