4. OPERATING INSTRUCTIONS
3.1 SET UP.
3.1.1. Remove the radiator cap and clean around the radiator fitting.
3.1.2. Fit the appropriate vehicle adaptor as follows:
a)
Bayonet fastening.
Select the correct adaptor cap size for the type of vehicle and radiator to be tested.
Screw the cap on the adaptor clip support.
Fasten the two metallic clips of the cap to the filler neck and wind the upper knob to ensure a tight fit.
b)
Screw Fastening.
Select the correct adaptor cap size for the type of vehicle and radiator to be tested.
Screw the cap on the radiator and check that the rubber gasket is correctly fitted.
3.1.3. Connect the radiator tester to the cap by means of the quick-release coupling at the end of the hose.
3.2. CHECKING THE SYSTEM.
3.2.1. Pump the system until the pressure gauge indicates approximately 1 bar.
3.2.2. If gauge pointer remains stationary for one minute it will indicate that the cooling system is in good working order.
3.2.3. If the pointer falls, it indicates that the system has a leak resulting in loss of pressure.
3.2.4. Check the system for water leaks and, if located, repair accordingly.
3.2.5. If there is pressure loss but no external water leakage check condition of the head gasket.
3.2.6. Re-test to ensure the repaired system is in good working order.
VS001 - 4 - 120106
01284 757500
01284 703534
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
www.sealey.co.uk
Web
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Item Part No
Description
1
329/000.240
GASKET
2
329/156.15
PRESSURE GAUGE
3
329/156.70
PUMPING DEVICE
4
329/000.281
GASKET
5
329/416.02
FAST ADAPTOR
6
329/000.750
CLAMP
7
329/416.03
HOSE
8
329/003.035
WASHER
9
329/002.070
NUT
10
329/156.33
GASKET
11
329/156.35
SPRING
12
329/416.38
LOWER FASTENING DEVICE
13
329/156.76
PUMP BODY
PARTS LIST FOR:
COOLING SYSTEM TESTER
Model:
VS001
Issue Date:-
260804
Issue No:-
2
