Viking 2tonne Low entry Long reach
troLLey Jack with rocket Lift
model no:
2100tB
thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. Safety
9
ensure the jack is in sound condition and good working order. Take action for immediate repair or replacement of damaged parts. Use
recommended parts only. The use of improper parts may be dangerous and will invalidate the warranty.
9
locate the jack in an adequate, well lit working area for its function.
9
Keep working area clean and tidy and free from unrelated materials.
9
Use jack on level and solid ground, preferably concrete. Avoid tarmacadam as jack may sink in.
9
Place wedges under wheels of vehicle (but ensure wheels of jack can move freely ).
9
ensure the vehicle handbrake is engaged (or in “PARKed” mode), and switch the engine off.
9
ensure minimum distance of 0.5m between vehicle tilt & static objects such as doors, walls, etc.
9
ensure all non essential persons keep a safe distance whilst the jack is in use.
9
ensure there are no passengers in the vehicle to be jacked up.
9
Place jack under vehicle manufacturer’s recommended lifting points (see vehicle hand book).
9
Check that the lifting point is stable and centred on the jack saddle.
9
ensure the jack wheels are free to move and that there are no obstructions.
warning
: The jack is a lifting device only.
9
To support the load always use axle stands (available from your Sealey stockist).
9
ensure there are no persons or obstruction beneath the vehicle before lowering.
9
Use a qualified person to lubricate and maintain the jack.
9
Use only hydraulic jack oil.
9
When not in use store jack in a safe, dry, child proof area in the lowered position.
8
Do not
jack vehicle which may result in spillage of fuel, battery acid, or dangerous substances.
8
Do not
work under the vehicle until axle stands have been correctly positioned.
8
Do not
operate the jack if damaged.
8
Do not
exceed the rated capacity of the jack.
8
Do not
use the jack for purposes other than which it is intended.
8
Do not
top up the hydraulic unit with brake fluid. Use hydraulic oil only.
8
Do not
allow untrained persons to operate the jack.
8
Do not
allow the vehicle to move whist lifting or lowering.
8
Do not
use the jack to move vehicle.
8
Do not
adjust the safety overload valve.
2. introDuction
dual piece hydraulic unit with heavy-duty long chassis provides easy access to deep set jacking points. lift and twist dead
man’s lowering mechanism operates via ‘T’ shaped handle to provide a smooth, controlled lowering of the load and helps prevent
accidental lowering. Rocket lift feature brings lifting arm into contact with jacking point with minimal pumps. Polyurethane wheels
for smoother manoeuvrability and helps prevent damage to workshop floor. Protective jack handle sleeve helps prevent accidental
damage to car bodywork when pumping the handle. Foot pedal for quick approach of the lifting saddle to the vehicle in confined
spaces. Includes removable rubber saddle pad and built-in tool tray for fasteners and tools. 3 Year Guarantee - 2nd & 3rd
year subject to T’s&C’s and registration on website (www.sealey.co.uk).
3. Specification
Model ..........................................................................2100tB
Capacity .........................................................................2tonne
min Saddle Height ...........................................................75mm
max Saddle Height ........................................................530mm
max Chassis Height ......................................................150mm
length ...........................................................................940mm
Replacement rubber jack pad ...................................2100TB.A
2100TB Issue 1 11/12/19
Original Language Version
© Jack Sealey limited
Refer to
instructions
Wear safety
footwear
1 3 5
2 4 R
TJL3
Chock
wheels
Never
exceed
jack capacity
Close
Raise
Lower
Lift & twist
to lower
OR
Use on a hard level floor
Apply
handbrake
w w w. s e a l e y. c o . u k
Use suitable axle stands
X2
Raise
