MASTER LOCKING WHEEL NUT REMOVAL SET
MODEL NO:
SX299.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING!
DO NOT
use the tool if damaged or thought to be faulty.
WARNING!
Ensure that Health & Safety, Local Authority Regulations and general workshop practice Regulations are adhered to
when using tools.
8
DO NOT
use the tool for a task it is not designed to perform.
8
DO NOT
use the tool unless you have been instructed in its use by a qualified person.
8
DO NOT
operate the tool if you are tired or under the influence of alcohol, drugs or intoxicating medication.
9
Maintain the tool in good condition.
9
Follow all workshop safety rules, regulations and conditions.
9
Wear eye protection, protective gloves and safety footwear.
9
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
9
Keep children and non essential persons away from the work area.
2. INTRODUCTION
Simple to use master kit has the capability of removing practically any locking wheel nuts. Kit includes shroud which protects the wheel
against any damage. Very effective and a must have workshop tool.
3. SPECIFICATION
Model no ................................................................ SX299.V2
Consumable parts:
Replacement disposable blades (pack of 10) ......... SX299DB
4. CONTENTS
Refer to
Instructions
Wear eye
protection
Wear protective
gloves
Wear safety
footwear
SX299.V2 Issue 1 07/01/20
Original Language Version
© Jack Sealey Limited
No.
Part number
Description
1
S
X299.V2-01
Impact driver
2
SX299.02
Centre punch
3
SX299.03
Hand protection ring
4
SX299.04
Main body & outer shroud
5
SX299DB
Blade C available in packs of 10
6
SX299.06
Blade A
7
SX299.07
Blade B
8
SX299.08
1/2” drive impact socket 24mm
