background image

12V SV12 SERIES 1/2 DRIVE CORDLESS 

RATCHET WRENCH 80NM - BODY ONLY

MODEL NO: 

CP1209

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  SAFETY

1.1. 

  

GENERAL SAFETY

 

9

   Follow all workshop safety rules, regulations and conditions when using the wrench.

 

9

   Remove the battery pack from the wrench before servicing or performing any maintenance.

 

9

   Maintain the wrench and battery pack in good condition. Check moving parts for alignment on a regular basis.

 

9

   Replace or repair damaged parts. Use an authorised service agent and recommended parts only. Unauthorised parts may be  

 

  dangerous and will invalidate the warranty.

 

9

   Ensure the wrench is ‘locked’ before installing the battery pack.

 

9

   Keep the wrench, battery pack and charger clean for optimum performance.

 

9

   Keep the work area clean and tidy and free from unrelated materials. Ensure that there is adequate lighting.

 

9

   Ensure that battery pack is correctly inserted into the wrench handle and latched in place before operating wrench.

 

‰

  

WARNING!

 When working around vehicle brake systems we recommend you wear suitable respiratory protection due to the possible  

  presence of asbestos dust from brake linings.

 

9

   Avoid unintentional starting.

 

9

   Wear approved safety eye/face shield, ear defenders and hand protection.

 

9

   Remove ill-fitting clothing. Remove ties, watches, rings and other loose jewellery and contain long hair.

 

9

   Maintain correct balance and footing. Ensure the floor is not slippery and wear nonslip shoes.

 

9

   Keep children and unauthorised persons away from the work area.

 

8

  

DO NOT

 operate the wrench if any parts are missing as this may cause failure and/or personal injury.

 

8

  

DO NOT

 use the wrench unless you have been instructed in its use by a competent person.

 

8

  

DO NOT

 operate the wrench where there are solvent fumes or flammable gases, liquids or solids.

 

8

  

DO NOT

 leave the wrench operating unattended.

 

8

  

DO NOT

 carry wrench with your finger on the trigger.

 

8

  

DO NOT

 use the wrench for a task it is not designed to perform.

 

8

  

DO NOT

 operate the wrench when you are tired or under the influence of alcohol, drugs or intoxicating medication.

 

8

  

DO NOT

 get the wrench or battery charger wet or use in damp or wet locations.

 

9

   Keep wrench and charger in the case and store in a safe, dry, childproof area where the temperature will not exceed 40°C (104°F).

2.  INTRODUCTION

 

Compact, lightweight cordless ratchet wrench, allows access to tight spaces. Variable  

 

 

speed trigger with safety lock. Heavy-duty mechanical steel ratchet head with forward  

 

and reverse control. Robust composite housing with soft, comfortable grip. Integrated  

 

LED battery level indicator and LED work light. Requires 12V battery and mains  

 charger.

3.  SPECIFICATION

Model No:................................................................. CP1209

B

attery Options  (not included see below.)

 .............................

12V 1.5Ah Li-ion, 12V 3Ah Li-ion, 12V 4Ah Li-ion

No load speed: ........................................................

0-200rpm

Drive: ..........................................................................

1/2”Sq

M

ax. torque:

 ....................................................

80Nm (59lb.ft)

Noise power  ...........................................................

 90dB (A)

Noise pressure  .......................................................

 79dB (A)

Vibration  ...............................................................

7.373 m/s²

Uncertainty  ...............................................................

1.5 m/s²

Replacement parts: .....................

CP1200MC Mains Charger

C

P1209 Issue 2 (2) 05/09/22

Original Language Version

© Jack Sealey Limited

Refer to 

instructions

Wear eye 

protection

 Wear protective 

gloves

 Wear ear 

protection

Отзывы: