instructions for
torque wrench digital 3/8”sq drive
2-24nm (1.48-17.70lb.ft)
model no:
stw307
thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. safety
warning! do not
use the torque wrench if damaged or thought to be faulty.
9
ensure all workshop safety rules, regulations and conditions are complied with when using the torque wrench.
9
maintain correct balance and footing. ensure the floor is not slippery and wear non-slip shoes.
9
Keep children and unauthorised persons away from the working area.
9
Avoid over-torquing the wrench (110% of maximum torque range) as this will cause loss of accuracy.
9
Keep the wrench away from magnets.
9
in operation when you hear the continuous tone, stop pulling immediately especially in case the target torque/ angle is low.
9
ensure all sockets, extensions and drivers are rated correctly and are of flawless construction. Avoid using adaptors and extensions for
best accuracy.
8
do not
use the torque wrench if the batteries are low, torque accuracy will be affected.
8
do not
use the wrench as a hammer or similar.
8
do not
use on live electrical circuits the plastic handle is not insulated.
8
do not
subject the wrench to excessive force or shocks.
8
do not
drop, throw, or violently shake the wrench.
8
do not
operate the wrench in damp conditions.
8
do not
operate the wrench in dusty conditions.
8
do not
push on the lcd panel.
8
do not
use wrench until first instructed in its use by a qualified person.
8
do not
leave the wrench in a place exposed to excessive heat, humidity or direct sunlight.
8
do not
use organic solvents such as alcohol or thinners to clean the wrench.
9
After use, turn the wrench off, clean with a soft dry cloth, place torque wrench in its storage case, and store in a safe, dry, childproof
location.
9
remove the batteries if the torque wrench is not to be used for a long time, to prevent damage from leaking.
2. introduction
rugged and resilient digital torque wrench suitable for workshop and factory use. lcd read-out with led, audible alarm and vibration
indicating achieved and target torque levels. Selectable track or peak modes and up to five user preset memories available. Read-outs in Nm,
lb.in, lb.ft or kg.m. reversible chrome Vanadium 72-tooth ratchet allows torque reading in either direction. Accurate to ±2% of wrench’s stated
capacity. Supplied with test certificate and storage case.
3. specification
model no .................................................................. stW307
drive ........................................................................... 3/8”sq
length ........................................................................ 335mm
range ....................................................................... 2-24nm
............................(1.4-17.7lb.ft, 17.7-212.4lb.in, 0.2-2.4kg.m)
Battery ......................................................2 x AAA (supplied)
4. operation
stW307 | issue 1 22/05/17
Original Language Version
© Jack sealey limited
refer to
instructions
Wear protective
gloves
Wear safety
footwear
Wear protective
clothing
