background image

instructions for

jUMP STARTER POWER PACK LITHIUM (LiFePO4)

model no: 

SL2S

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, 

and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  SAFETy

 

Modern vehicles contain extensive electronic systems.

 

You are required to check with the vehicle Manufacturer, for any specific instructions regarding the use of this type of    

 

equipment on each vehicle.

 

No liability will be accepted for damage / injury, where this product is not used in accordance with all instructions. 

 

‰

   WARNING!

 risK of electric sHocK or fire.

 

9

   read the entire manual before using this product. failure to do so could result in serious injury or death.

 

9

   this booster and charger are not intended for use by children. Persons with reduced physical, sensory or mental capabilities, or lack of  

  experience and knowledge, must be given supervision or instruction concerning the use of the product by a person responsible for  

  their safety. children should be supervised to ensure they do not play with the booster or charger.

 

8

  

DO NOT

 put fingers or hands into any of the unit’s outlets.

 

8

  

DO NOT

 expose the unit to rain or snow.

 

9

   the appliance is to be used only with the power supply unit provided with the appliance.

 

9

   Use only recommended attachments. Use of an attachment not recommended or sold by Sealey may result in a risk of fire, electric  

  shock or injury to persons or damage to property.

 

9

  to reduce the risk of damage to the electric plug or cord, pull by the adaptor rather than the cord when disconnecting the unit.

 

8

  

DO NOT

 operate the unit with damaged cables or clamps.

 

8

  

DO NOT

 operate the unit if it has received a sharp blow, been dropped or otherwise damaged in any way; take it to a qualified service  

 person.

 

8

 

DO NOT

 disassemble the unit; take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a  

  risk of fire or electric shock. 

 

‰

   WARNING! RISK OF EXPLOSIVE GASES.

 

WORKING IN THE VICINITy OF A LEAD-ACID BATTERy IS DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES    

 

DURING NORMAL OPERATION. IT IS IMPORTANT THAT yOU FOLLOW THESE INSTRUCTIONS EACH TIME yOU USE THE  

 UNIT.

 

9

   to reduce the risk of a battery explosion, follow these instructions and those published by the battery manufacturer and the  

 

  manufacturer of any equipment you intend to use in the vicinity of the battery. review the cautionary markings on these products and  

  on the engine.

 

8

  

DO NOT

 set the unit on flammable materials, such as carpeting, upholstery, paper, cardboard, etc. 

 

9

   never place the unit directly above battery being jumped. 

 

8

  

DO NOT

 use the unit to jump start a vehicle while charging the internal battery. 

1.1.    

PERSONAL PRECAUTIONS

 

‰

  

WARNING!

 risK of eXPlosiVe GAses. A sPArK neAr tHe BAtterY mAY cAuse A BAtterY eXPlosion. to reduce  

  tHe risK of A sPArK neAr tHe BAtterY:

 

8

 

 NEVER

 smoke or allow a spark or flame in the vicinity of a battery or engine.

 

9

   remove personal metal items such as rings, bracelets, necklaces and watches when working with a lead-acid battery. A lead-acid  

  battery can produce a short-circuit current high enough to weld a ring  to metal, causing a severe burn.

 

9

   Be extra cautious, to reduce the risk of dropping a metal tool onto the battery. it might spark or short-circuit the battery or other    

  electrical part that may cause an explosion.

 

8

  

DO NOT

 permit the internal battery of the unit to freeze. never charge a frozen battery. 

 

9

   to prevent sparking, neVer allow clamps to touch together or contact the same piece of metal.

 

9

   consider having someone nearby to come to your aid when you work near a lead-acid battery.

sl2s | issue 1  27/07/17

Original Language Version

© Jack sealey limited

read before 

first use

Wear eye

protection

Wear protective 

gloves

Warning:

corrosive 

substance

Warning!

caution: risk of 

electric shock

do not 

expose to rain

indoor use only class ii charger use in a well 

ventilated area

Keep away 

from sparks and 

flame - 

battery could 

emit explosive 

gases

Содержание SL2S







Отзывы: