background image

SAC41 - 1 - 05/12/06

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.

IMPORTANT:

PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,

WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE
THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1.

SAFETY INSTRUCTIONS

INSTRUCTIONS FOR:  

AIR COOLER, HEATER 

PURIFIER & HUMIDIFIER

MODEL NO:

SAC41

1.1.

ELECTRICAL SAFETY

!  

WARNING!

It is the responsibility of the owner and the operator to read, understand and comply with the following:

You must check all electrical products, before use, to ensure that they are safe. You must inspect power cables, plugs,
sockets and any other connectors for wear or damage. You must ensure that the risk of electric shock is minimised by
the installation of appropriate safety devices. A Residual Current Circuit Breaker (RCCB) should be incorporated in the
main distribution board. We also recommend that a Residual Current Device (RCD) is used. It is particularly important
to use an RCD with portable products that are plugged into a supply which is not protected by an RCCB. If in any doubt
consult a qualified electrician. You may obtain a Residual Current Device by contacting your Sealey dealer. 

You must

also read and understand the following instructions concerning electrical safety.

1.1.1.

The 

Electricity at Work Act 1989 

requires that all portable electrical appliances, if used on business 

premises, are tested by a qualified electrician, using a Portable Appliance Tester (PAT), at least once a year.

1.1.2.

The 

Health & Safety at Work Act 1974 

makes owners of electrical appliances responsible for the safe 

condition of those appliances and the safety of the appliance operators. 

If in any doubt about electrical 

safety, contact a qualified electrician.

1.1.3.

Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply. 
See 1.1.1. and 1.1.2. and use a Portable Appliance Tester.

1.1.4.

Ensure that cables are always protected against short circuit and overload.

1.1.5.

Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that
none is loose

1.1.6.

Important:

Ensure that the voltage marked on the appliance matches the 

power supply to be used and that the plug is fitted with the correct fuse - 
see fuse rating at right.

1.1.7.

DO NOT

pull or carry the appliance by the power cable.

1.1.8.

DO NOT 

pull the plug from the socket by the cable.

1.1.9.

DO NOT

use worn or damaged cables, plugs or connectors. Immediately 

have any faulty item repaired or replaced by a qualified electrician. When a
BS 1363/A UK 3 pin plug is damaged, cut the cable just above the plug 
and 

dispose of the plug safely. 

Fit a new plug according to the following instructions (UK only).

a) Connect the GREEN/YELLOW earth wire to the earth terminal ‘E’.
b) Connect the BROWN live wire to the live terminal ‘L’.
c) Connect the BLUE neutral wire to t he neutral terminal ‘N’.
d) After wiring, check that there are no bare wires, that all wires have been 
correctly connected, that the cable outer insulation extends beyond the cable restraint and that the 
restraint is tight.

Double insulated products, which are always marked with this symbol,     are fitted with live (brown) and 
neutral (blue) wires only. To rewire, connect the wires as indicated above - 

DO NOT

connect either wire to the 

earth terminal.

1.1.10. Products which require more than 13 amps are supplied without a plug. In this case you must contact a 

qualified electrician to ensure that a suitably rated supply is available. We recommend that you discuss the 
installation of an industrial round pin plug and socket with your electrician.

1.1.11. If an extension reel is used it should be fully unwound before connection. A reel with an RCD fitted is 

preferred since any appliance plugged into it will be protected. The cable core section is important and should 
be at least 1.5mm

2

, but to be absolutely sure that the capacity of the reel is suitable for this product and for 

others which may be used in the other output sockets, we recommend the use of 2.5mm

2

section cable.

FUSE RATING 13 AMP

Blue
Neutral 
Wire

Yellow & Green 
Earth Wire 

Cable 
Restraint

Brown
Live 
Wire

Содержание SAC41








Отзывы: