background image

DIRECT DRIVE SILENT COMPRESSORS

MODEL NO: 

SAC0607S, SAC2410S, SAC5016S

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  SAFETY

1.1.    

ELECTRICAL SAFETY

 

‰

WARNING!

 It is the responsibility of the owner and the operator to read, understand and comply with the following: You must check 

 

all electrical products, before use, to ensure that they are safe. You must inspect power cables, plugs, sockets and any other connectors  

 

for wear or damage. You must ensure that the risk of electric shock is minimised by the installation of appropriate safety devices. 

 

A Residual Current Circuit Breaker (RCCB) should be incorporated in the main distribution board. We also recommend that a Residual  

 

Current Device (RCD) is used. It is particularly important to use an RCD with portable products that are plugged into a supply which is 

 

not protected by an RCCB. If in any doubt consult a qualified electrician. You may obtain a Residual Current Device by contacting your  

 

Sealey dealer. You must also read and understand the following instructions concerning electrical safety.

1.1.1.   

The 

Electricity at Work Act 1989

 requires that all portable electrical appliances, if used on business premises, are tested  

 

 

by a qualified electrician, using a Portable Appliance Tester (PAT), at least once a year.

1.1.2.   

The 

Health & Safety at Work Act 1974

 makes owners of electrical appliances responsible for the safe condition of those   

 

 

appliances and the safety of the appliance operators. If in any doubt about electrical safety, contact a qualified electrician.

1.1.3.   

Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply. See 1.1.1. and use a    

 

Portable Appliance Tester.

1.1.4.   

Ensure that cables are always protected against short circuit  and overload.

1.1.5.   

Regularly inspect power supply cables and plugs for wear or  damage and check all connections to ensure 

 

that none is loose.

1.1.6.   

IMPORTANT: 

Ensure that the voltage marked on the appliance matches the power supply to be used and 

 

that the plug is fitted with the correct fuse - see fuse rating at right.

 

8

  

DO NOT

 pull or carry the appliance by the power cable.

 

8

  

DO NOT

 pull the plug from the socket by the cable.

 

8

  

DO NOT

 use worn or damaged cables, plugs or connectors. Immediately have any faulty item repaired or 

 

replaced by a qualified electrician.

1.1.7. 

  

This product is fitted with a BS1363/A 13 Amp 3 pin plug. 

        

 If the cable or plug is damaged during use, switch the electricity supply and remove from use. 

        

 Ensure that repairs are carried out by a qualified electrician.

        

 Replace a damaged plug with a BS1363/A 13 Amp 3 pin plug. If in doubt contact a qualified electrician.

 

 a) Connect the GREEN/YELLOW earth wire to the earth terminal ‘E’.

 

 b) Connect the BROWN live wire to the live terminal ‘L’.

 

 c) Connect the BLUE neutral wire to the neutral terminal ‘N’.

       

 Ensure that the cable outer sheath extends inside the cable restraint and that the restraint is tight. 

        

Sealey recommend that repairs are carried out by a qualified electrician.

 IMPORTANT!

  The use of extension leads to connect these compressors to the mains is not recommended as the resulting  

 

 

voltage drop reduces motor, and therefore pump performance.

1.2.    

GENERAL  SAFETY 

 

9

   Familiarise yourself with the application and limitations of the compressor. 

 

9

   Ensure the compressor is in good order and condition before use. If in any doubt 

DO NOT

 use the unit and contact an electrician/   

  service agent.

 

‰

  

WARNING! 

Compressor must only be serviced by an authorised agent. 

DO NOT

 tamper with, or attempt to adjust, pressure  

 

  switch or safety valve.

 

9

   Before moving, or maintaining the compressor ensure it is unplugged from the mains supply and that the air tank pressure has 

 

been vented. 

 

9

   Maintain the compressor in good condition and replace any damaged or worn parts. Use genuine parts only. Unauthorised parts may be  

  dangerous and will invalidate your warranty.

 

9

   Read the instructions relating to any accessory to be used with this compressor. Ensure the safe working pressure of any air appliance  

  used exceeds compressors output pressure. If using a spray gun, check that the area selected for spraying is provided with an air    

  change/ventilation system.

 

9

  

Ensure the air supply valve is turned off before disconnecting the air supply hose.

 

9

   To move the compressor use the handle only. Maintain unit’s centre of gravity when lifting. 

 

8

  

DO NOT

 attempt to lift or move the compressor by any other means. 

S

AC0607S, SAC2410S, SAC5016S     Issue 1    09/03/21

Original Language Version

© Jack Sealey Limited

Refer to 

instructions

Wear eye 

protection

Wear ear 

protection

WARNING:

High Voltage

WARNING:

Hot surface

WARNING:

Automatic 

start up

Indoor use only

DO NOT

 open 

the air cock 

before an air 

hose is attached

Replacement fuse 

rating:

 

13 AMP

Содержание SAC0607S






Отзывы: