background image

INSTRUCTIONS FOR: 

AIR STAPLE GUN 13-32

MM

 CAPACITY 

MODEL NO:

 SA789.V2

 1.  SAFETY

 3.  SPECIFICATION

 2.  INTRODUCTION

 

WARNING! DO NOT

 use the nail gun if damaged, has missing parts or is thought to be faulty. Contact your Service Agent.

 WARNING!

 Never engage in horseplay with the tool.

 

WARNING! 

Always wear approved eye, face and hand protection when operating the nail gun. Wear a full face shield if stapling produces

 

metal filings or wood chips.

 

WARNING!

 Check correct air pressure is maintained and not exceeded. We recommend 60 to 100psi. 

 

WARNING! 

Keep hands, face, feet and all parts of the body away from the firing head at all times.

 

DO NOT

 use the nail gun for a task it is not designed to perform.

 

DO NOT

 operate the nail gun near flammable substances or flammable containers.

 

DO NOT

 use the nail gun unless you have been instructed in its use by a qualified person.

 

DO NOT

 carry the nail gun by the air hose, or pull the hose from the air supply. 

 

DO NOT

 operate the nail gun if you are tired or under the influence of alcohol, drugs or intoxicating medication.

 

DO NOT

 carry the nail gun with your hand on the power trigger in order to avoid unintentional firing.

 

DO NOT

 direct the nail gun or the air from the air hose at yourself or others.

 

DO NOT 

load bent or damaged staples into the magazine.

 

DO NOT 

overreach. Keep proper footing and balance at all times. Ensure the floor is not slippery and wear non-slip shoes.

 

DO NOT 

drive staples into thin boards or near the corners of the workpiece.

 

DANGER!

 

When putting the nail gun down, ensure that the trigger safety slide is not fouled, risking accidental firing.

 

Avoid unintentional firing. Keep fingers away from the trigger when not driving staples.

 Disconnect from the air supply

 especially    

 

when loading staples,when carrying the tool, handing the tool to another person, leaving the work area, making adjustments to the tool,  

 

clearing a jam or whenever it is left unattended.

 

Check the safety mechanism before use. Never use the stapler unless the safety is operating properly, otherwise the stapler could    

 

drive a staple unexpectedly.

 

Place the tool properly on the workpiece. 

DO NOT

 drive staples one on top of another or with the tool at too steep an angle. The  

 

 

staples could ricochet.

 

Keep the work area clean and well lit.

 

Keep people away from the work area.

 

Maintain the nail gun in good condition and replace any damaged or worn parts. 

Use genuine parts only. Unauthorised parts may   

 

be dangerous and will invalidate the warranty.

 

Keep the air hose away from heat, oil and sharp edges. Check the air hose for wear before each use and ensure that all   

 

 

connections are secure.

 

Follow all workshop safety rules, regulations, and conditions when using the nail gun.

 

Keep children and non essential persons away from the working area.

 

When not in use, disconnect from the air supply, remove the staples from the magazine and store cased in a safe, dry, childproof  

 

 location. 

  

WARNING! The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations that    

 

may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into  

 

 

this product, but must be applied by the operator.

Professional air stapler with lightweight aluminium body and rubber grip handle. Safety trigger device to prevent accidental firing of staples. 

Supplied in carry-case with oiler and starter pack of staples.

Model No:  . . . . . . . . . . . . . . . . . SA789.V2

Staple Capacity:.  . . . . . .13-32mm 18SWG

Maximum Pressure:.. . . . . . . . . . . . . 100psi

Air Inlet Size:. . . . . . . . . . . . . . . . . 1/4"BSP

Gun Weight: . . . . . . . . . . . . . . . . . . .1.05kg

Noise Power:  . . . . . . . . . . . . . . . . .95dB(A)

Noise Pressure:  . . . . . . . . . . . . . . .82dB(A)

Vibration:  . . . . . . . . . . . . . . . . . . . 3.05m/s²

Uncertainty:  . . . . . . . . . . . . . . . . 1.525m/s²

SA789.V2  Issue: 1 - 27/02/15

Original Language Version

 © Jack Sealey Limited

IMPORTANT:

 

PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT 

CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL 

INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

Wear

protective 

gloves

Wear eye

 protection

Wear ear

protection

Refer to 

instruction 

manual

Содержание SA789.V2







Отзывы:

Похожие инструкции для SA789.V2