background image

Auto DArkening WelDing Helmet 

SHADe 9-13 

Model no: 

PWH1, PWH2, PWH3 and PWH4

thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  SAfety

 

‰

  

WArning!

 This helmet is not suitable for use with laser welding or CUTTInG or for overhead welding applications.

 

9

   ensure all workshop safety rules, regulations and conditions are complied with when using welding equipment. The helmet will not  

  offer protection against misuse of workshop tools, equipment, or accessories.

 

9

   Maintain the helmet in good condition and protect cartridge from liquid and dirt contact. Regularly replace the protective lens and   

  replace any damaged or worn parts. Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.

 

9

   ensure the front cover window is securely in place before use.

 

9

   Fit the helmet and adjust the head band so the helmet will sit as low and near to your face as possible.

 

9

   Use helmet only in temperatures ranging from -10°C to 60°C.

 

9

   Remove ill fitting clothing, remove ties, watches, rings and other loose jewellery.

 

9

   Maintain correct balance and footing.

 

9

   Ensure the floor is clear from obstructions, not slippery and wear non-slip shoes.

 

9

   Keep children and unauthorised persons away from the working area.

 

‰

   WArning!

 The helmet will only protect the eyes and face from radiation and sparks. It will not protect against explosive devices or  

  corrosive liquids.

 

8

  

Do not

 use helmet for any purpose for which it is not designed.

 

8

  

Do not

 use helmet unless you have been instructed in its use by a qualified person.

 

8

  

Do not

 open or tamper with the shade cartridge.

 

8

  

Do not

 get the helmet wet or use in damp or wet locations.

 

8

  

Do not

 leave work place with helmet in lowered position, as bright light source may darken cartridge unexpectedly.

 

8

  

Do not

 place the helmet on a hot surface.

 

8

  

Do not

 use helmet without front cover window fitted. To do so will invalidate your warranty.

 

9

   Clean helmet (see section 5.4) and store the helmet in a safe, dry, childproof location.

 

‰

  

WArning!

 Before welding always inspect the cartridge filter to ensure that it is not damaged. To test the filter prior to welding,    

  direct the front of the cartridge filter to a bright light source which will cause the lens to darken. Then using your hand rapidly cover  

  and uncover the sensor. The filter should lighten momentarily then return to a dark state.

 

‰

  

WArning!

 

Do not

 use the helmet if damaged or you suspect it may be faulty. (Contact Sealey stockist).

 

  

DAnger!

 

Do not

 USe if, at any time, the face plate in the cartridge FAIlS to darken when exposed to a welding spark. Remove  

  cartridge and return to your Sealey stockist for checking.

 

  

DAnger!

 Continued use of the product knowing that the auto darkening feature is noT FUnCTIonInG may dAMAGe YoUR    

  eYeS and CAUSe BlIndneSS.

2.  introDuction

W

elding helmet with infinitely adjustable shade control between 9-13. Complies with BS EN 379, BS EN 175 and DIN standards. Fully 

automatic switching from light to dark on striking arc. Shade is selected by a rotary knob on side of helmet. Grinding function enables user to 

grind without removing mask. Solar panel power supply - no batteries required. Features sensitivity and delay controls for switching light to 

dark. Suitable for MIG, TIG, arc welding and grinding.

3.  SPecificAtion

Grinding Function: ........................................................................................... Yes

operating Temperature: .................................................................. -5°C to +55°C

operating Time light/dark: ..................................................................... “0.04ms“

Power: ..................................................................................................Solar Cells

Shade Active: ...................................................................................

9-13 Variable

Shade Inactive: ................................................................................................... 4

V

iewing Area: .........................................................................................

92x42mm

P

WH1, PWH2, PWH3, PWH4 Issue 1 17/06/19

Original Language Version

© Jack Sealey limited

Refer to 

instructions

Содержание PWH1

Страница 1: ... it is not designed 8 8 DO NOT use helmet unless you have been instructed in its use by a qualified person 8 8 DO NOT open or tamper with the shade cartridge 8 8 DO NOT get the helmet wet or use in damp or wet locations 8 8 DO NOT leave work place with helmet in lowered position as bright light source may darken cartridge unexpectedly 8 8 DO NOT place the helmet on a hot surface 8 8 DO NOT use hel...

Страница 2: ... up to move it to make the helmet tilt up further or to tilt down further Then retighten the external thumbwheels 4 3 Selecting the shade level See fig 1 4 4 Refer to the shade guide in Section 7 and adjust the knob on the side of the helmet to the correct setting 4 5 Grind position See fig 1 4 5 1 Turn the shade knob anticlockwise until it clicks into the grind position DANGER When grinding is fi...

Страница 3: ...e cartridge as above fig 8 5 3 Replacing the inner protective cover lens 5 3 1 Use the recess on the top edge of the lens to pull it out and renew fig 7 Refit the lens under the clips at each side of the cassette 5 4 Cleaning 5 4 1 Clean by wiping with a soft cloth Clean cartridge surfaces regularly DO NOT use solvent based cleaners Clean sensors and solar cells with methylated spirits using a cle...

Страница 4: ...al and Electronic Equipment WEEE When the product is no longer required it must be disposed of in an environmentally protective way Contact your local solid waste authority for recycling information Note It is our policy to continually improve products and as such we reserve the right to alter data specifications and component parts without prior notice Important No Liability is accepted for incor...

Отзывы: