background image

instructions for

slide hammer/puller set 10pc

model no: 

ps983.v2

thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions, 

and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  saFetY

 

‰

   WArninG! ensure all Health and safety, local authority, and general workshop practice regulations are strictly adhered to when using  

 tools.

 

8

  

dO NOt

 use tools if damaged or worn.

 

9

   maintain the tools in good and clean condition for best and safest performance.

 

9

   ensure all threads are clean and well lubricated.

 

9

   Always check that puller is correctly assembled and is square with the workpiece. 

 

9

   ensure the nuts and bolts are tight on the jaw heads.

 

9

   if vehicle is raised, ensure it is adequately supported with axle stands, ramps, etc. as appropriate.

 

9

   Wear suitable clothing to avoid snagging. 

dO NOt 

wear jewellery. tie back long hair.

 

9

   Wear approved eye protection. A full range of personal safety equipment is available from your sealey dealer.

 

9

   Where possible shield workpiece with canvas or similar to provide  protection against failed parts.

 

8

   dO NOt 

heat puller jaws when heating a gear or bearing as this will affect the temper and, therefore, the strength of the material.

 

8

   dO NOt

 hit workpiece with a hammer if workpiece has not moved with maximum puller force applied. use a larger capacity puller.

 

9

   Account for all tools and parts being used and do not leave them in or on the vehicle.

 impOrtaNt:

 Always refer to the vehicle manufacturers service instructions, or proprietary manual, to establish the correct procedure and  

 data.

 NOte:

 this tool will exert strong forces on the object being worked on and may damage some objects depending on force required. 

2. 

iNtrOductiON

 

2.3 kg slide Hammer with 580mm shaft. can be used eight ways: external 3 leg Puller, internal 3 leg Puller, external 2 leg Puller,    

 

internal 2 leg Puller, Grip Wrench adaptor, lip Puller, Hub Puller, dent Puller. supplied in a carry-case. model no. Ps983 .

3. 

speciFicatiON

               model no: Ps983

       twin leg:

       internal capacity: .........................................Ø35-110mm

       reach:................................................................... 83mm

       external capacity: ....................................... Ø50-140mm

       reach:................................................................... 83mm

       triple leg:

       internal capacity: ........................................ Ø50-135mm

       reach:................................................................... 83mm

       external capacity: ....................................... Ø20-135mm

       reach:................................................................... 83mm

Ps983.V2    issue1 18/12/17

Original Language Version

© Jack sealey limited

refer to 

instruction

manual

Wear protective 

gloves

Wear eye 

protection

Отзывы: