background image

instructions for

 vacuum cleaners and front mounted 

squeegees

model no: 

Pc477,Pc477aK1

thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  safety  

1.1.     

electrIcal safety

 

‰

  

WarnIng!

 it is the responsibility of the owner and the operator to read, understand and comply with the following:

 

  You must check all electrical products, before use, to ensure that they are safe. You must inspect power cables, plugs, sockets and  

  

any other connectors for wear or damage. You must ensure that the risk of electric shock is minimised by the installation of appropriate   

  

  safety devices. A residual current circuit Breaker (rccB) should be incorporated in the main distribution board. We also recommend 

 

  that a residual current device (rcd) is used. it is particularly important to use an rcd with portable products that are plugged into a  

 

   supply which is not protected by an rccB. if in any doubt consult a qualified electrician. You may obtain a residual current device by  

 

   contacting your sealey dealer. You must also read and understand the following instructions concerning electrical safety.

 

   the electricity at Work Act 1989 requires all portable electrical appliances, if used on business premises, to be tested by a qualified  

 

   electrician, using a Portable Appliance tester (PAt), at least once a year.

 

  the Health & safety at Work Act 1974 makes owners of electrical appliances responsible for the safe condition of those appliances  

 

   and the safety of the appliance operators. if in any doubt about electrical safety, contact a qualified electrician.

              ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply and use a Portable    

 

   Appliance tester.

 

9

    ensure that cables are always protected against short circuit and overload.

 

9

    regularly inspect power supply cables and plugs for wear or damage and check all

 

   connections to ensure that none are loose.

 

9

   ensure that the voltage marked on the appliance matches the power supply to be used and that the plug is  

  fitted with the correct fuse - see fuse rating.

 

8

  

do not

 pull or carry the appliance by the power cable.

 

8

  

do not

 pull the plug from the socket by the cable.

 

8

  

do not 

use worn or damaged cables, plugs or connectors. immediately have any faulty 

  

item repaired or replaced by a qualified electrician. When an AstA/Bs approved uK 

 

  3 pin plug is damaged, cut the cable just above the plug and dispose of the plug safely. 

 

  fit a new plug according to the following instructions (uK only).

 

  a) connect the Green/YelloW earth wire to the earth terminal ‘e’.

 

  b) connect the BroWn live wire to the live terminal ‘l’.

 

  c) connect the Blue neutral wire to the neutral terminal ‘n’.

 

  d) After wiring, check that there are no bare wires, that all wires have been correctly connected, that the cable outer insulation extends  

 

  beyond the cable restraint and that the restraint is tight.

 

  double insulated products, which are always marked with this symbol      , are fitted with live (brown) and neutral (blue) wires only.   

 

  to rewire, connect the wires as indicated above - do not connect either wire to the earth terminal.

 

  Products which require more than 13 amps are supplied without a plug. in this case you must contact a qualified electrician to  

 

 

  ensure that a suitably rated supply is available.

1.2.    

general safety

 

 

9

   disconnect the cleaner from the power supply before servicing, changing accessories, or performing any maintenance.

 

9

   use only genuine parts and accessories. unauthorised parts and accessories may be dangerous and will invalidate your warranty.

 

9

   maintain the cleaner in good condition. use an authorised agent for servicing. Keep machine clean, but do not use solvents.

 

8

  

do not

 operate the unit without a filter in place as this will cause machine faults and will invalidate your warranty. 

 

9

   use only the paper cartridge filter specified for dry vacuuming. 

 

 

 

 

9

   use only the cloth filter specified for wet vacuuming. 

 

 

 

 

9

   Wear protective clothing and gloves. 

 

8

  

do not 

allow children or untrained persons to operate the cleaner. 

 

8

  

do not 

place attachments close to your face (especially eyes, ears).

 

8

  

do not

 point the hose end at other persons or animals.

 

  

danger! do not

 vacuum very fine powders,hot or glowing ash, inflammable,explosive, corrosive or other dangerous substances.

 

8

  

do not

 leave the machine running unattended, turn power supply off.

 

8

  

do not

 leave the vicinity until motor has come to a complete stop.

 

8

  

do not

 operate the cleaner when you are tired or under the influence of alcohol, drugs or intoxicating medication.

 

8

  

do not

 use the cleaner in the rain or in very damp conditions. 

Pc477,Pc477AK1.V2 | issue 4 05/12/16

Original Language Version

© Jack sealey limited

      refer to

   instructions

recommended fuse rating

13 Amp

Содержание PC477

Страница 1: ...fuse see fuse rating 8 8 DO NOT pull or carry the appliance by the power cable 8 8 DO NOT pull the plug from the socket by the cable 8 8 DO NOT use worn or damaged cables plugs or connectors Immediately have any faulty item repaired or replaced by a qualified electrician When an ASTA BS approved UK 3 pin plug is damaged cut the cable just above the plug and dispose of the plug safely Fit a new plu...

Страница 2: ... 1 Fully insert the hose into the suction coupler on the main drum It will automatically snap into place 4 1 2 To release the hose slide the release knob in the direction of the arrow and pull the hose out of the suction coupler 4 2 Filter Removal Fig 2a 2b 4 2 1 To access the filter unclip and remove the upper part of the 4 2 2 cleaner from the metal tank 4 2 3 To change the paper cartridge filte...

Страница 3: ...t by hand patting the filter 6 1 1 Remove the vacuum cleaner head to access the filter Fig 12 6 1 2 Remove all dust on the filter Clean and if necessary air dry the filter for further use 6 2 Emptying the Tank 6 2 1 Position the cleaner next to a suitable container or drain Lock tank onto frame Fig 4 Put the rear wheel locks on Hold the frame handle with one hand and lift the tank to the emptying ...

Страница 4: ...ntre and disposed of in a manner which is compatible with the environment When the product becomes completely unserviceable and requires disposal drain off any fluids if applicable into approved containers and dispose of the product and the fluids according to local regulations WEEE Regulations Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Elec...

Отзывы: