INSTRUCTIONS FOR:
DUST-FREE
AIR OPERATED SANDERS
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE
THE WARRANTY. PLEASE KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1.
SAFETY INSTRUCTIONS
6.
DECLARATION OF CONFORMITY
Sole UK Distributor
Sealey Group
Bury St. Edmunds
Suffolk.
01284 757500
01284 703534
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications
and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this equipment.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your
full name and address, including postcode.
Declaration of Conformity.
We, the sole importer into the
UK, declare that the products listed here are in conformity
with the following standards and directives.
The construction files for these products are held by the
Manufacturer and may be inspected, by a national authority,
upon request to Jack Sealey Ltd.
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Tools.
Dust-Free Air Operated Sanders
Models:
MA110AS, MA1501AS, MA150AS.V2,
MA200AS, MA407AS, MA90SC, MA150SC.
2006/42/EC Machinery Directive
93/68/EEC Marking Directive
27th March 2008
WARNING!
Ensure that Health & Safety, local authority, and general workshop practice regulations are
adhered to when using this equipment.
WARNING!
Disconnect from air supply and dust-free system before changing accessories, servicing or maintenance.
Maintain the
sander in good condition (use an authorised service agent).
Replace or repair damaged parts.
Use recommended parts only. Unauthorised parts may be dangerous and
will invalidate the warranty.
Use the sander in a suitable work area. Keep area clean, tidy and free from unrelated materials. Ensure that
there is adequate lighting.
Before each use check abrasive pad for condition. If worn or damaged replace immediately.
Ensure that there are no flammable or combustible materials near the work area.
WARNING!
Always wear approved eye or face protection when operating the sander.
If dust is generated, use face, dust, or respiratory protection in accordance with COSHH regulations.
Depending on the task, sander noise level may exceed 85dB, in which case wear safety ear defenders.
Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery. Contain and/or tie back
long hair.
Wear appropriate protective clothing and keep hands and body clear of working parts.
Maintain correct balance and footing. Ensure that the floor is not slippery and wear non-slip shoes.
Keep children and unauthorised persons away from the work area.
Check moving parts alignment on a regular basis.
Ensure that the workpiece is correctly secured before operating the sander. Never hold a workpiece by hand.
Check the workpiece to ensure that there are no protruding nails, screws, stones, etc.
Avoid unintentional starting.
WARNING!
Ensure that the correct air pressure is maintained and not exceeded.
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each use and ensure
that all connections are secure.
Prolonged exposure to vibration from these tools poses a health risk. It is the owner’s responsibility to correctly
assess the potential hazard, issue guidelines for safe periods of use and offer suitable protective equipment.
DO NOT
use the sander for a task it is not designed to perform.
DO NOT
operate sander if any parts are damaged or missing as this may cause failure and/or personal injury.
WARNING!
DO NOT
cut, grind, saw or sand any materials containing asbestos.
DO NOT
carry the sander by the hose, or yank the hose from the air supply.
DO NOT
get the sander wet or use in damp or wet locations.
DO NOT
use the sander with water. These models are dry sanders only.
DO NOT
operate sander when you are tired or under the influence of alcohol, drugs or intoxicating medication.
DO NOT
use sander where there are flammable liquids, solids or gases, such as paint solvents and including
waste wiping or cleaning rags etc.
DO NOT
oil the sander, or connect to an air supply which incorporates an oiler. Oiling will result in
damage to teflon surfaces within the sander.
DO NOT
leave the sander operating unattended.
DO NOT
carry the sander with your finger on the power lever.
DO NOT
direct air from the air hose at yourself or others.
When not in use disconnect from air supply and dust-free system, and store in a safe, dry, childproof location.
MA110AS, MA1501AS, MA150AS, MA200AS, MA407AS, MA90SC, MA150SC
Issue No: 6 - 27/03/08
MA110AS, MA1501AS, MA150AS, MA200AS, MA407AS, MA90SC, MA150SC
Issue No: 6 - 27/03/08
Signed by Mark Sweetman
www.sealey.co.uk
Web
MODELS:
MA110AS, MA1501AS, MA150AS.V2, MA200AS, MA407AS, MA90SC, MA150SC.
