Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE OR PERSONAL INJURY AND WILL INVALIDATE THE
WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1.
SAFETY INSTRUCTIONS
Follow all workshop safety rules, regulations, and conditions when using wrench.
WARNING!
Disconnect from air supply before changing accessories or servicing.
Maintain the
wrench in good condition and replace any damaged or worn parts.
Use
genuine parts only. Non-authorised parts may be dangerous and will invalidate the warranty.
WARNING!
Check correct air pressure is maintained and not exceeded. We recommend 90psi.
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each
use and ensure that all connections are secure.
Only use impact sockets which are specifically designed for use with a ratchet wrench.
Wear approved safety eye/face shield, ear defenders, and hand protection.
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
Keep children and non essential persons away from the working area.
DO NOT
use the wrench for a task it is not designed to perform.
WARNING! DO NOT
use wrench if damaged or thought to be faulty. (Contact Service Agent).
DO NOT
use wrench unless you have been instructed in its use by a qualified person.
DO NOT
expose the comfort grip to excessive heat.
DO NOT
carry the wrench by the air hose, or yank the hose from the air supply.
DO NOT
operate wrench if you are tired, under the influence of alcohol, drugs or intoxicating medication.
DO NOT
carry wrench with your hand on the power trigger in order to avoid unintentional starting.
DO NOT
direct air from the air hose at yourself or others.
When not in use disconnect from air supply and store in a safe, dry, childproof location.
INSTRUCTIONS FOR:
AIR RATCHET WRENCHES
Model No’s:
GSA20, GSA20KIT,
GSA21, GSA21KIT.
2.
INTRODUCTION & SPECIFICATIONS
MODEL No: . . . . . . . .GSA20 . . . . . GSA21
Drive size:. . . . . . . . . . 3/8”Sq . . . . . .1/2”Sq
Max torque: . . . 60lb/ft/81Nm 60lb/ft/81Nm
Air consumption:. . . . . . 4cfm . . . . . . . 4cfm
Operating pressure: . . . 90psi . . . . . . .90psi
Air inlet size:. . . . . . . 1/4”BSP . . . . 1/4”BSP
Weight: . . . . . . . . . . . . .1.2kg . . . . . . 1.2kg
Noise Power: . . . . . 102.89dB . . . 102.89dB
Noise Pressure: . . . . 91.81dB . . . . 91.81dB
Vibration: . . . . . . . .13.88m/s²
. . . 13.88m/s²
MODEL No: . . . . . . GSA20KIT, GSA21KIT
Impact Sockets: . . 9,10,11,13,14,17,19mm
DuoMetric coverage: . . . . . . . . . 7/16”, 3/4”
Extension Bar: . . . . . . . . . . . . . . . . . 75mm
Bit Extension Bar:. . . . . . . . . . . . . . . 75mm
Driver Bits: . Slotted, 5.5mm, Phillips #2, #3
Feature packed, Third Generation twin pawl air ratchet wrenches with contoured handles which
insulate user from chill and vibration. Finger operated trigger and textured grip allows added
control even with greasy hands. Low noise exhaust adjusts 360°
-
keeping air flow away from
operator. A four position air regulator, integrated into air inlet, allows adjustment of torque output.
The GSA20KIT and GSA21KIT include a selection of impact sockets, extension bars and driver
bits.
Original Language Version
GSA20, GSA20KIT, GSA21, GSA21KIT Issue:3(SP)- 27
/02/13
