INSTRUCTIONS FOR:
CORDLESS WET/DRY
RECHARGEABLE VAC
MODEL No:
CPV144.V2
1. SAFETY INSTRUCTIONS
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS
INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.
KEEP THESE INSTRUCTIONS FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly
maintained, give you years of trouble free performance
.
1.1. GENERAL
Keep the
vac clean and in good condition.
Replace or repair damaged parts.
Use recommended
parts only. Unauthorised parts may be dangerous and
will invalidate the warranty.
Keep children and non-essential persons away from the
work area.
DO NOT
leave the vac operating unattended.
DO NOT
use the vac for a task it is not designed for.
DO NOT
operate the vac when you are tired or under
the influence of alcohol, drugs or intoxicating medication.
DO NOT
operate the vac if any parts are missing or
damaged, as this may cause failure and/or personal
injury.
Stay alert, watch what you are doing and use common
sense when operating vac.
Do not allow persons unfamiliar with the vac or these
instructions to operate the vac.
Ensure the switch is in the off position before inserting
battery pack.
Recharge only with the charger supplied.
Use vac only with specifically designated battery packs.
WARNING!
Under extreme conditions, liquid may be
ejected from the battery: avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts
eyes, also seek medical help.
WARNING!
Sparks inside motor can ignite flammable
vapours or dust. To avoid fire or explosion do not use
near flammable or combustible liquids or gases.
DO NOT
vacuum anything that is burning or smoking
such as cigarettes, matches or hot ashes.
DO NOT
vacuum toxic materials to avoid health hazards
from vapours or dusts.
Keep the vac and all accessories where they will not be
subjected to heat or flame. To avoid injury, shock, or fire,
never use a damaged vac, cord or charger.
DO NOT
put any object into openings.
DO NOT
use with any opening blocked.
Keep free of dust, lint, hair, and anything that may
reduce air flow. Keep hair, loose clothing, fingers away
from openings and moving parts.
DO NOT
use for dry vacuuming without filter in place.
DO NOT
use any charger other than the one with the vac.
DO NOT
handle plug or charging unit with wet hands.
Replace or repair damaged parts.
Use recommended
parts only. Unauthorised parts may be dangerous and
will invalidate the warranty.
1.2. BATTERY SAFETY
BATTERIES MAY BE DANGEROUS IF NOT HANDLED
WITH CARE AND ACCORDING TO THESE
INSTRUCTIONS.
Before removing battery from charger or vac, remove
personal metallic items such as rings, bracelets,
necklaces and watches.
Ensure the charger is switched off and disconnected
before attempting to remove the battery.
If the battery terminals are corroded or dirty, clean
them before replacing battery.
DO NOT
dis-assemble the battery for any reason.
WARNING! DO NOT
allow metal objects to touch both
battery terminals simultaneously. Arcing or short circuit
will result.
DO NOT
allow battery terminals to make contact with
any other metallic part.
DO NOT
leave battery in a discharged state, recharge
battery immediately. If the vac is not in use, recharge the
battery every three months.
Dispose of the old battery in accordance with local
authority acid battery regulations.
DO NOT
dispose of
with regular refuse.
1.3. ELECTRICAL SAFETY
USE ONLY SUPPLIED CHARGER PLUG FOR VAC.
WARNING!
It is the user’s responsibility to read, under
stand and comply with the following electrical
instructions: You must ensure the risk of electric shock is
minimised by the installation of appropriate safety
devices. An RCCB (Residual Current Circuit Breaker
should be incorporated in the main distribution board.
We also recommend that an RCD (Residual Current
Device) is used with all electrical products, particularly
portable equipment which is plugged into an electrical
supply not protected by an RCCB.
You must
also read and understand the following
instructions concerning electrical safety.
1.3.1.
The Electricity At Work Act 1989
requires all portable
electrical appliances, if used on business premises, to
be tested by a qualified electrician, using a Portable
Appliance Tester (PAT), at least once a year.
1.3.2. The Health & Safety at Work Act 1974
makes owners
of electrical appliances responsible for the safe condition
of the appliance and the safety of the appliance operator.
If in any doubt about electrical safety, contact a
qualified electrician.
1.3.3. You must ensure that you:
Inspect the charger plug, cable and connector for wear
and damage to ensure items are safe before connecting
to the mains power supply. If worn or damaged
DO NOT
use.
Check cables are always protected against short circuit
and overload.
Important: Check that the voltage marked on the charger
plug is the same as the power supply to be used.
Uncoil the cable between charger and the charger base.
DO NOT
pull the charger plug from the mains socket by
the lead.
DO NOT
use any other type of charger with this product.
DO NOT
try to take the charger plug apart.
DO NOT
use the charger plug to charge or power any
other electrical item.
DO NOT
get charger wet, or use in wet, damp conditions
(for indoor use only).
Original Language Version
CPV144.V2 Issue: 3 - 17/01/12
