INSTRUCTIONS FOR
INDUSTRIAL CABINET 5 DRAWER, 3 SHELF 1800MM
MODEL NO:
APICCOMBO5
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING!
Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this cabinet.
9
Locate cabinet in a suitable work area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
WARNING!
Use cabinet on level and solid ground, preferably concrete.
9
Keep the cabinet clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the work area.
8
DO NOT
use the cabinet for any purpose other than that for which it is designed.
8
DO NOT
use the cabinet outdoors.
8
DO NOT
place the cabinet in a damp or wet location or an area where there is condensation.
8
DO NOT
clean the cabinet with any solvents which may damage the surfaces or the protective coating.
8
DO NOT
move the cabinet when there are items placed inside.
8
DO NOT
overload the cabinet.
2. INTRODUCTION
Four variants of industrial quality, double door, freestanding cabinets with a range of internal shelving and drawer options. Easily assembled
with minimal tool use. Durable scuff resistant, adjustable shelving each with a weight limit of 150kg. Drawers run on heavy duty ball bearing
slides each with a weight limit of 75kg, fitted with safety locking catches preventing inadvertant opening. Reinforced steel doors with zinc
plated locking bars, provide 3 point locking. Supplied with two coded keys. Ideal for home, office, garage or workshop use.
3. SPECIFICATION
Model no: ..................................... APICCOMBO5
Width x Depth x Height
O
verall size:
.........................900 x 450 x 1800mm
Medium drawer (x3): ..............775 x 330 x 100mm
Large drawer (x2): ..................775 x 330 x 200mm
S
helf size (x3):
.........................840 x 380 x 30mm
I
nternal cabinet overall size:
.850 x 420 x 1710mm
4. CABINET CONTENTS
Unpack the contents of the boxes and check against the parts
lists/diagrams. If there are any parts missing, contact your local
Sealey dealer.
Part No. Part Name
No.
A1
Rear Panel
1
A2
Rear Panel
1
B1
Left Side Panel
1
B2
Right Side Panel 1
C1
Left Door
1
C2
Right Door
1
D Top
1
E
Bottom
1
F
Inner Face Plate 1
G
Outer Face Plate 1
J
Plastic Stop
4
K
Locking Pin Locator 2
L
Hinge Pin Locator 4
M
Screw
18
N
Hinge Pin
4
Refer to
instruction
manual
APICCOMBO5 Issue 2(SP) - 26/07/16
Original Language Version
© Jack Sealey Limited
