4 LEVEL MULTI PURPOSE TROLLEY FOR
DIAGNOSTICS
MODEL NO:
APDT435
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING!
Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this
storage system.
9
Locate in a suitable work area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
WARNING!
Use storage on level and solid ground, preferably concrete.
9
Keep the storage system clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the work area.
8
DO NOT
use the storage system for any purpose other than that for which it is designed.
8
DO NOT
use the storage system outdoors.
8
DO NOT
place the storage system in a damp or wet location or an area where there is condensation.
8
DO NOT
clean the storage system with any solvents which may damage the surfaces or the protective coating.
8
DO NOT
move the storage system when there are items placed inside.
8
DO NOT
step on the shelves.
8
DO NOT
overload the storage system.
2. INTRODUCTION
Multi-purpose trolley with 4 shelves. Ideal for diagnostics and general
use around the workshop. Compact in design with tough industrial powder
coating finish. 4 open shelves with 10mm EVA liner on top shelf and a
lockable compartment; makes it suitable for storing laptops, testers, leads
and battery chargers. Easily manoeuvrable with ergonomic side handles
and 2 x front steering swivel castors and 2 x rear fixed castors. Supplied
with side tray and paper towel holder. Side peg board panels with work
with the Sealey TTS range of hooks.
3. SPECIFICATION
MODEL NO: .......................................................... APDT435
Overall Size (W x D x H): ...................
435 x 522 x 1178.5mm
APDT435 Issue 1 18/03/2022
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear protective
gloves
Содержание APDT435
