Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY
AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
INSTRUCTIONS FOR:
ADJUSTAbLE FLOW GREASE GUN
2-WAY FILL HEAVY-DUTY
MODEL No:
AK49
r
WARNING!
Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using this equipment.
3
Familiarise yourself with the application and the limitations of the grease gun, as well as the potential hazards.
3
Keep the work area clean, uncluttered and ensure there is adequate lighting.
3
Keep the grease gun clean for best and safest performance.
3
Check moving parts alignment on a regular basis.
7
DO NOT
use the grease gun for any purpose other than that it was designed for.
7
DO NOT
operate the grease gun if any parts are damaged or missing, as this may cause failure and/or personal injury.
3
When not in use store in a safe, dry, childproof location.
r
WARNING!
Always wear approved eye protection when operating the grease gun.
1. SAFETY INSTRUCTIONS
2. INTRODUCTION & SPECIFICATION
Original Language Version
© Jack Sealey Limited
Highly durable die-cast aluminium alloy pump head. Features dual piston design ideal for a variety of applications. 2-way fill with cartridge or manual
capability. Fitted with adjustable pressure switch on lever allowing user to select between low pressure/high volume and high pressure/low volume,
depending on the particular application. Supplied with rigid delivery tube and push on hydraulic 4-jaw coupling. Rubber gripped grease tube and
handle for easy grip. Accepts standard 400g cartridges.
AK49 Issue No.1 - 25/09/13
Fig.1
Fig.2
