INSTRUCTIONS FOR:
GRAVITY FEED/AIR DISCHARGE
OIL DRAINER
Model No:
AK458DX.V3
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
AK458DX.V3 - 1 - 150206
1.
SAFETY INSTRUCTIONS
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1.1.
GENERAL SAFETY
!
WARNING!
Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this equipment.
"
Familiarise yourself with the application and limitations of the oil drainer, as well as the potential hazards.
!
WARNING!
Disconnect the drainer from the air supply before changing accessories, servicing or performing any maintenance.
"
Maintain the drainer in good condition (use an authorised service agent).
"
Replace or repair damaged parts.
Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
"
Keep the work area clean, uncluttered and ensure there is adequate lighting.
"
Keep the drainer clean for best and safest performance.
"
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
!
WARNING! While extracting high temperature oils, keep hands, face and body protected using suitable personal protective equipment (PPE).
#
DO NOT
Extract caustic or flammable products.
"
Keep children and unauthorised persons away from the working area.
!
WARNING!
Ensure correct air pressure is maintained and not exceeded.
"
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each use, and ensure that all connections are secure.
#
DO NOT
use the drainer for any purpose other than that for which it is designed.
#
DO NOT
operate the drainer if any parts are damaged or missing as this may cause failure and/or personal injury.
#
DO NOT
stand on the drainer.
#
DO NOT
adjust or tamper with the safety valve.
#
DO NOT
move the drainer by the hose, or yank the hose from the air supply.
#
DO NOT
place attachments close to your face (especially eyes, ears, etc.) and do not point hose at other persons or animals.
#
DO NOT
allow untrained persons to operate the drainer.
#
DO NOT
operate the drainer when you are tired or under the influence of alcohol, drugs or intoxicating medication.
#
DO NOT
leave the drainer operating unattended.
#
DO NOT
direct air from the air hose at yourself or others.
"
When not in use disconnect from the air supply, vent reservoir and store in a safe, dry, childproof area.
"
Dispose of waste oil in accordance with local authority regulations.
!
WARNING!
DO NOT pollute the environment by allowing uncontrolled discharge of waste oil.
$
$
DANGER! DO NOT release drain pan clamp lever when there is pressure in the reservoir as pipe and drain pan will be propelled
upward with force. This could result in damage and/or serious injury.
2.1.
Introduction
2.1.1. Steel fabricated 90ltr reservoir. Height adjustable steel drain pan fitted with plastic filter tray and removable large-diameter plastic
extension. Gravity feed reservoir with air discharge. Fitted with reservoir oil level indicator tube. Heavy-duty wheels and castors for
easy mobility.
2.2.
Assembly
2.2.1. Connect the ball valve (Fig. 1C) to the drain basin and tighten it with a suitable wrench.
2.2.2. Insert the assembled group into the resevoir tank and tighten the ring sleeve (Fig. 2D). Adjust the height and lock in position using the
hand wheel lock (Fig. 2E).
2.2.3. Attach the hose with the ball valve adaptor (Fig. 3F) to the base of the resevoir tank.
Fig. 1
Fig. 2
Fig. 3
2.
INTRODUCTION & ASSEMBLY
