Sealey AB931.V2, Инструкции

Страница: 3 / 3

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions, call us on 01284 757525 and leave your full name and address
including your postcode.
01284 757500
01284 703534
sales@sealey.co.uk
www.sealey.co.uk
Web
6. TROUBLESHOOTING
email
Sole UK Distributor, Sealey Group,
Kempston Way,
Suffolk Business Park,
Bury St. Edmunds, Suffolk, IP32 7AR
Environmental Protection.
Recycle unwanted materials instead of disposing of them as waste.
All tools, accessories and packaging should be sorted, taken to a recycle centre
and disposed of in a manner which is compatible with the environment.
THE PROBLEM THE CAUSE THE SOLUTION
Paint Runs. Too much paint applied Press trigger lightly
Air brush too close to object Hold further away from object.
Moving air brush too slowly along workpiece Move at a faster speed.
Grainy Spray. Paint too thick. Thin paint.
Dried deposits on tip, needle or regulator. Clean air brush thoroughly.
Paint Splattering. Needle snapping back into tip. Release needle gently.
Paint too thick Thin paint.
Curved Stroke. Air brush arcing too close to object. Keep air brush parallel to the object,
unless curved stroke is desired.
Paint Spitting. Needle snapping back into tip. Release needle gently.
Paint too thick. Thin paint.
Restricted Spray. Air adjusting valve out too far. Loosen the air adjusting valve to obtain the
correct spray.
Paint tube in pot clogged. Clean as described above.
Bubbles in Paint Cup. Air adjusting valve out too far. Adjust air valve to eliminate bubbles.
Paint tube in pot clogged. Clean as described above.
Erratic Spray. Fluid needle bent or paint deposits on needle. Replace needle or clean as required.
01
04
07
03
05
02
Fig. 4
Nozzle seat
(internal)
06 "wrench" not shown
Item Part number Description
01 AB931.V2-01 Gun module complete
02 AB931.V2-02 Air regulator valve
03 AB931.V2-03 Gravity cup
04 AB931.V2-04 Fluid adjustment screw
05 AB931.V2-05 Hose assembly
06 AB931.V2-06 Wrench (not shown)
07 AB931.V2-07 Adaptor, air hose
AB931.V2 Issue: 1 10/01/14
Original Language Version
© Jack Sealey Limited