background image

© Sealevel Systems, Inc. 

- 16 - 

SIO4-104.232 User Manual 

 

 

 

 Warranty 

Sealevel's commitment to providing the best I/O solutions is reflected in the Lifetime 
Warranty that is standard on all Sealevel manufactured products. We are able to 
offer this warranty due to our control of manufacturing quality and the historically 
high reliability of our products in the field. Sealevel products are designed and 
manufactured at its Liberty, South Carolina facility, allowing direct control over 

product development, production, burn-in and testing. 

Sealevel Systems, Inc. (hereafter "Sealevel") warrants that the Product shall conform 
to and perform in accordance with published technical specifications and shall be 
free of defects in materials and workmanship for life. In the event of failure, 
Sealevel will repair or replace the product at Sealevel's sole discretion. Failures 
resulting from misapplication or misuse of the Product, failure to adhere to any 
specifications or instructions, or failure resulting from neglect or abuse are not 
covered under this warranty.  

Warranty service is obtained by delivering the Product to Sealevel and providing 
proof of purchase. 

Return authorization must be obtained from Sealevel Systems 

before returned merchandise will be accepted. Authorization is obtained by 
calling Sealevel Systems and requesting a Return Merchandise Authorization 
(RMA) number. 

The Customer agrees to insure the Product or assume the risk of 

loss or damage in transit, to prepay shipping charges to Sealevel, and to use the 
original shipping container or equivalent. Warranty is valid only for original 
purchaser and is not transferable.  

Sealevel Systems assumes no liability for any damages, lost profits, lost savings or 
any other incidental or consequential damage resulting from the use, misuse of, or 
inability to use this product. Sealevel Systems will not be liable for any claim made 
by any other related party. 

This warranty applies to Sealevel manufactured Product. Product purchased through 
Sealevel but manufactured by a third party will retain the original manufacturer's 
warranty. 

Sealevel Systems, Incorporated  
2779 Greenville Highway 
P.O. Box 830 
Liberty, SC 29657 USA 
(864) 843-4343 

FAX: (864) 843-3067 

www.sealevel.com 
email: [email protected] 

 

Technical Support is available Monday - Friday from 8 a.m. to 5 p.m. Eastern time 

 

Trademarks 

Sealevel Systems, Incorporated acknowledges that all trademarks referenced in this 
manual are the service mark, trademark, or registered trademark of the respective 
company. 

Содержание SIO4-104.232



















Отзывы: