19
© Sealevel Systems, Inc.
SeaI/OUSBSERIAL | SL9177 04/2022
Mounting Options
SeaI/O Mounting Kit
Expanding your I/O count is as simple as adding N-
Series expansion units to the Base SeaI/O module
(or other N-series modules). Each NSeries module
includes an expansion and strap kit (Item#
KT122
),
which includes a 5” CAT5 interconnect
cable, four
metal straps, and four #440 metal screws. The
image shows a SeaI/O stack configuration using
the expansion kit.
DIN Rail Mounting
All SeaI/O modules are available with a factory
installed DIN-rail mounting clip. Alternatively, DIN-
rail mounting clips can be ordered as a field
upgrade kit (Item#
DR104)
. The bracket with clip is
easily attached using two included #4-40 Phillips
head machine screws.
Table/Wall Mounting
The flush mount bracket kit (Item#
KT123)
is
extremely versatile and can be used to mount
SeaI/O modules from the top, bottom, or back edge.
Individual modules or a stack of SeaI/O modules
can be mounted flat to a tabletop, underneath a
counter, or inside an enclosure. The kit can be used
to mount SeaI/O modules flat to a wall, or along the
back edge, similar to DIN-rail mounting options.
Universal Mounting Bracket
The universal mounting bracket (Item#
KT125
) can
be used as a “backpack” to mount power supplies
and other devices to SeaI/O modules. The bracket
has holes for both 75mm and 100mm VESA
mounting options. The universal arrangement of
slots and holes accept bolt sizes to M4 and can be
used for virtually any mounting configuration.
