4
© Sealevel Systems, Inc. R91001 Manual | SL9211 11/2022
Introduction
The Relio R9 is an application-ready platform for your next product design. The system is based on the
200MHz Atmel AT91SAM9263 microcontroller boasting a 32-bit ARM® instruction set for maximum
performance. With up to 256MB RAM and 256MB NAND Flash memory, the unmatched I/O features of the
Relio R9 extend the possible uses beyond traditional ARM applications.
To provide the fastest time to market, the Windows CE 6.0 BSP binary and low-level drivers for system I/O
are included. Additionally, the Relio R9 software package is equipped with the Sealevel Talos I/O
Framework, which offers a high-level object-oriented .NET Compact Framework (CF) device interface. This
interface provides an I/O point abstraction layer with built-in support for the specific needs of analog and
digital I/O such as gain control and debouncing.
The Relio R9 is housed in a rugged, small enclosure suitable for mounting almost anywhere and is rated for
a full -40° – +85°C operating temperature range. The Relio R9 is powered from your 7-30VDC source or
select from a variety of Sealevel power supply options.
Features
1.
Atmel AT91SAM9263 ARM® Processor
2.
Up to 256MB SDRAM and 256MB NAND Flash Memory
3.
Dual SD/MMC Expansion Card Slots
4.
LCD and Backlight Controller
5.
Resistive Touchscreen Controller
6.
10/100 BaseT Ethernet
7.
Two USB 2.0 Ports; USB Device Port
8.
CAN Bus Interface
9.
On-board Serial, Digital, and Analog I/O
10.
Compatible with Windows Embedded CE 6.0 and Linux
11.
Low Power Requirements
12.
Power and Status LED Indicators
