HAND WRAPPER
OPERATING INSTRUCTIONS
WARNING – PLEASE READ FIRST
Do not put hand near moving parts (heat blade or heat
)
OPERATING INSTRUCTIONS
MODEL: U-450
plate)
Remove all obstacles which may interfere with machine
functions
Keep work area clean and clear of clutter
Do not sit or stand on machine
Disconnect from power source before performing
maintenance on the machine
When machine is not in use, please clean and store properly
, p
p p
y
Do not place any electrical parts or plug/cord in water
The cord should be away from heat
Machine may have sharp or pointed edges, use caution
when cleaning
when cleaning
Machine should only be operated by personnel who can
read, understand and respect warnings and instructions
regarding this machine and the manual
OPERATING TIPS
Check the film rollers to ensure screws are tight
Adjust the stopper for film as needed
When machine is turned “ON”, make sure the pilot lamp
inside the main switch is on
Allow 5-10 minutes for the heat blade and heat plate to
reach the correct temperature
Turning the temperature to the highest setting will shorten
the life of the heaters
