Sealed Air TASKI swingo XP-M Скачать руководство пользователя страница 40

Страница: 40 / 137

GTS

Technical Manual

28. November 2014

Edition: V1.00/2014

5-17

0.1

6 t

ank - tank se

t - XP_

_R_V1.0

0.f

5.3

Tank

5.3.3

Removing of tank set

Picture 20: Tank set

•

Remove the power electronics according to the chapter

REMOVING OF POWER ELECTRONICS.

•

Remove the waste water sensor according to the chapter

REMOVING OF WASTE WATER SENSOR.

•

Remove the tank cover according to the chapter REMOVING OF

TANK COVER.

•

Disconnect main cable (04/120) from charger.

•

Remove charger main cable from wiring harness.

•

Remove the two screws (12/104) and washers (12/103) for the

cable guiding strip (12/101) at the tank.

•

Remove the hose clamp (05/111) from the fresh water hose (05/

107).

•

Remove the fresh water hose from the tank.

•

Thread out the cables from the tank set.

•

Remove the 4 screws (04/107) from the two flange bolt (04/

106).

•

Remove the two flange bolts.

•

Remove complete tank.

•

According to what you need to exchange, remove the existing

parts from the tank and place it on the new one.

Содержание TASKI swingo XP-M
































































































































Результаты поиска

Содержание TASKI swingo XP-M

Отзывы:

Бренды по названию

Популярные бренды

Sealed Air TASKI swingo XP-M, Техническое руководство

Результаты поиска

Содержание TASKI swingo XP-M

Отзывы:

Бренды по названию

Популярные бренды