Seagate ST500LM021-RF, Руководство по эксплуатации продукта

Страница: 9 / 35

Seagate Laptop Thin HDD Product Manual, Rev. H 8
Drive Specifications
2.1 Formatted Capacity
Operational Shock 400 Gs at 2 ms max
Non-Operational Shock 1000 Gs at 1 ms max
Vibration, operating 5–200 Hz: 2.0 Gs
201–500 Hz: 1.0 Gs
Vibration, nonoperating 5–500 Hz: 5.0 Gs
Nonrecoverable read errors 1 per 10
14
bits read
Rated workload Average rate of <55TB/year. The MTBF specification for the drive assumes the I/O workload does
not exceed the average annualized workload rate limit of 55TB/year. Workloads exceeding the
annualized rate may degrade the drive MTBF and impact product reliability. The average annual-
ized workload rate limit is in units of TB per year, or TB per 8760 power-on hours. Workload rate
limit = TB transferred × (8760/recorded power-on hours).
Warranty To determine the warranty for a specific drive, use a web browser to access the following web
page: http://www.seagate.com/support/warranty-and-replacements/.
From this page, click on the “Is my Drive under Warranty” link. The following are required to be
provided: the drive serial number, model number (or part number) and country of purchase. The
system will display the warranty information for the drive.
Load-unload cycles 600,000 at 25°C, 50% rel. humidity
Supports Hotplug operation per the
Serial ATA Revision 3.2 specification
Yes
1. One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
Model
Formatted Capacity
(1)
1. One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
Guaranteed Sectors Bytes per Sector
500GB model 500 GB 976,773,168
512 (logical) / 4096 (physical)
320GB model 320 GB 625,142,448
Table 1 Drive Specifications Summary (continued)
Drive Specification ST500LM021, ST500LM023 & ST500LM024 ST320LM010