background image

Seagate SkyHawk Product Manual, Rev. B

 17

www.seagate.com

Drive Specifications

2.7.6 Shock

All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting
screws. Shock may be applied in the X, Y or Z axis.

2.7.6.1

Operating shock

1TB - 4TB

These drives comply with the performance levels specified in this document when subjected to a maximum operating
shock of 80 Gs based on half-sine shock pulses of 2ms during read operations. Shocks should not be repeated more than 2
times per second.

6TB and 8TB

These drives comply with the performance levels specified in this document when subjected to a maximum operating
shock of 70 Gs based on half-sine shock pulses of 2ms during read operations. Shocks should not be repeated more than 2
times per second.

2.7.6.2

Non-operating shock

1TB-4TB

The non-operating shock level that the drive can experience without incurring physical damage or degradation in
performance when subsequently put into operation is 300 Gs based on a non-repetitive half-sine shock pulse of 2ms
duration.

6TB and 8TB

The non-operating shock level that the drive can experience without incurring physical damage or degradation in
performance when subsequently put into operation is 250 Gs based on a non-repetitive half-sine shock pulse of 2ms
duration.

2.7.7 Vibration

All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive
mounting screws. Vibration may be applied in the X, Y or Z axis. Throughput may vary if improperly mounted.

2.7.7.1

Operating vibration

The maximum vibration levels that the drive may experience while meeting the performance standards specified in this
document are specified below.

2.7.7.2

Non-operating vibration

The maximum non-operating vibration levels that the drive may experience without incurring physical damage or
degradation in performance when subsequently put into operation are specified below.

2Hz to 22Hz

0.25 Gs (Limited displacement)

22Hz to 350Hz

0.50 Gs

350Hz to 500Hz

0.25 Gs

5Hz to 22Hz

3.0 Gs (Limited displacement)

22Hz to 350Hz

3.0 Gs

350Hz to 500Hz

3.0 Gs

Содержание SKYHAWK SURVEILLANCE ST1000VX005







































Отзывы: