4. Managing GoFlex Satellite™
GoFlex Satellite Settings and Preferences
GoFlex Satellite™ User Guide
24
Changing the Name of Your GoFlex Satellite
The GoFlex Satellite device is named “GoFlex Satellite” by default. This is the network name
that appears in the wireless network list when you choose to connect to Satellite from your
WiFi-enabled device. This name is also know as the SSID (Service Set Identifier).
You can change this name if you prefer it to be named differently. Follow these steps to
change the GoFlex Satellite name:
1.
From the GoFlex Media app or if you are using a browser, select
Settings
.
2.
Select
Change Satellite Name
.
TBA: Describe what happens next.
Disconnecting From the GoFlex Satellite Network
GoFlex Satellite can be accessed by three different devices at once. If a fourth device
attempts to connect, it is blocked. To allow a different device to access GoFlex Satellite, you
will need to disconnect from its wireless network.
1.
Open your device’s list of wireless networks.
2.
Choose a wireless network other than GoFlex Satellite.
Setting a Password
Create a password if you want to restrict access to your GoFlex Satellite. Setting a password
turns WPA security on, which protects your wireless transmissions with GoFlex Satellite. To
stop requiring a password after one has been created, select Turn Password Off and then
enter the current password.
3.
From the GoFlex Media app or if you are using a browser, select
Settings
.
1.
Select
Turn Password On
.
2.
Type your password.
The password must be at least eight characters long and no more than 64 characters. All
ASCII characters are acceptable. Most of these characters are available on your device’s
keyboard.
Resetting GoFlex Satellite
If GoFlex Satellite isn’t working right, try resetting the device by pressing and holding the
Power button for 15 seconds.
TBA: Describe what happens next
.
Draft.
Seagate
Confidential.
