Seagate 9ZM175-006, Руководство по эксплуатации продукта

Страница: 34 / 42

Constellation ES.3 Serial ATA Product Manual, Rev. F 33
Notes:
1. All pins are in a single row, with a 1.27mm (0.050”) pitch.
2. The comments on the mating sequence apply to the case of backplane blindmate connector only. In this case, the mating
sequences are:
• the ground pins P4 and P12.
• the pre-charge power pins and the other ground pins.
• the signal pins and the rest of the power pins.
3. There are three power pins for each voltage. One pin from each voltage is used for pre-charge when installed in a blind-mate
backplane configuration.
4. All used voltage pins (V
x
) must be terminated.
6.3 Supported ATA commands
The following table lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands,
refer to the Serial ATA: High Speed Serialized AT Attachment specification
. See “S.M.A.R.T. commands” on page 40.for details and
subcommands used in the S.M.A.R.T. implementation.
Table 9 Supported ATA commands
Command name Command code (in hex)
Check Power Mode E5
H
Download Microcode 92
H
Execute Device Diagnostics 90
H
Flush Cache E7
H
Flush Cache Extended EA
H
Identify Device EC
H
Idle E3
H
Idle Immediate E1
H
NoP 00
H
Read Buffer E4
H
Read Buffer DMA E9
H
Read DMA C8
H
Read DMA Extended 25
H
Read FPDMA Queued 60
H
Read Log DMA Ext 47
H
Read Log Ext 2F
H
Read Multiple C4
H
Read Multiple Extended 29
H
Read Native Max Address F8
H
Read Native Max Address Extended 27
H
Read Sectors 20
H
Read Sectors Extended 24
H
Read Sectors Without Retries 21
H
Read Verify Sectors 40
H
Read Verify Sectors Extended 42
H
Read Verify Sectors Without Retries 41
H
Request Sense Data Ext 0B
H
Sanitize Device - Status Ext B4
H
/ 0000
H