Seaga JDL-2 COMBO, Руководство по обслуживанию и запасным частям

Страница: 23 / 78

23 JDL V1.0 8 2022
SERVICE MODE
1. PRICE PROGRAM
Price Program is used to set the prices for All Items, by Row or by individual Selection. Save time and set
All Items to the most common price, going back to Row or Selection for different prices as required.
ALL ITEMS
1. Press Service Mode Button
2. Press 1 for Price Program
3. Press 1 for All Items
4. Use number keys to enter new price
5. Press # to Save changes
6. Press * to exit to previous menu
ROW
1. Press Service Mode Button
2. Press 1 for Price Program
3. Press 2 for Row
4. Use number keys to enter Row number
5. Use number keys to set new price, including cents.
6. Press # to Save changes
7. Press # to go to Next row or
8. Press * to exit to previous menu
SELECTION
1. Press Service Mode Button
2. Press 1 for Price Program
3. Press 3 for Selection
4. Use number keys to enter Selection number
5. Use number keys to set new price, including cents.
6. Press # to Save changes
7. Press # to go to Next selection or
8. Press * to exit to previous menu
COUPON
IMPORTANT: This option requires a programmed validator. Up to five different coupon values can be set.
In sales mode, once a coupon is accepted, no further coupons will be accepted until a successful vend
has been made. If no value is set, coupons will be shown as free vends. If using both coupons and tokens,
there are only five selection combinations available. For example, if Coupon1 is set for “All Items”, Token1
is also set for “All Items”.