Seaga JDL-2 COMBO, Руководство по обслуживанию и запасным частям

Страница: 14 / 78

14 JDL V1.0 8 2022
Front of machine
Back of machine
1.) For most bottles, place bottom of the first bottle against the front of the column. Place the top of the
second bottle to the back of the column, facing the bottom of the bottle with the top of the first bottle. See
Figure 13. Load 12 oz. cans bottom to bottom in the first two positions, then top to top in the back position.
Load 16 oz. cans bottom to bottom. 20 oz. Gatorade bottles are loaded bottom to top.
2.) To adjust the rear spacer, grasp firmly and lift, freeing the spacer from the slots in the column sides. Move
the rear spacer to the closest slot to the back of the bottle or can placed in the rear of the column. Insert the
bottom left corner first. The gap between the rear spacer and the rear bottle or can must be less than ½ inch.
The slots are in ½ inch increments to let you adjust for many sizes of products. Lower the rear spacer into the
new position, making sure the spacer is straight vertically.
3.) Finish loading to the top of the column, making sure the items are perfectly horizontal and not tilted or
skewed in the column.
LOADING BEVERAGE LANES
The Product Columns in your machine use an Auger that rotates counterclockwise to drop the beverage into
the Product Bin.
1.) Grasp Locking Tab and slide up to allow Retainer to rotate forward into Load Position.
Figure 13
– Retainer
Retainer
Locking Tab