Website: www.seada.co.uk
12 / 26
4.4 Event setting
The Event Set part supports RS232, RS485, IR, TCP/IP, Delay, Compare, LED and
Toggle setting. Before set events, at least one key action must be added first. The
following introduction is about how to set events for each action.
4.4.1 RS232 Setting
This item is used for setting the events of the selected key action to control the
third-party device through RS232 (1~3) and RS485 (4~5) ports.
Operation procedure:
1)
Select a key action in action list.
2)
Set the “Lib Name” and “Lib Function” as needed.
3)
Select the RS232/485 port.
4)
Confirm and set the baud rate, data bit, stop bit and parity.
5)
Type RS232 command in data box, and then press “add” to save.
