14
Fig. 20
2.16"
2.56"
3.86"
Fig. 19
Adjustable rear bracket (with screws)
(On demand)
According to the chosen type of opening (inside or outside) and to the chosen leaf rotation, the rear bracket
must first be cut respecting the «
a
» dimension shown on pages 11 and 12 and then welded (Fig. 19)
The support must be positioned so that the operator is perfectly leveled (see Fig. 23)
INSTALLATION OF THE REAR BRACKET
PRELIMINARY NOTES
- Open carefully the package, making sure to not loose the parts listed in Fig. 6 or Fig.7
- Fasten the rear oscillating bracket as shown in Fig. 21
Attention
:
DO NOT use a hammer
for the insertion of the short brass pin;
its fitting into the bracket and clevis attachment must be done by the simple pressure of the hands.
Attention:
DO NOT incline the hydraulic operator
further than the allowed angle of the oscillating bracket
(1), risks the possible braking of it
Fig. 21
(1)
Fig. 22
INSTALLATION OF THE OSCILLATING FORK ON THE REAR BRACKET
6.30"
1.57"
0.59"
4.65"
3.15"
2.28"
INSTALLATION OF THE SPHERIC JOINT
Fig. 17
Fig. 18