LadyBug
E-COPY
TRANSMITTER TWO CHANNEL
FOUR CHANNEL
GB
GB
D E S T I N A T I O N O F U S E
T h e
433.920MHz
LadyBug
E-COPY
transmitter has been planned to be used
exclusively as a transmitter of digital data
with a frequency of 433.920 MHz sent to a
radio receiver created by SEA which
transmits on the same frequency and
which is codified to be interfaced with the
433.920
MHz
LadyBug
E-COPY
transmitter. It must be used only as a
generator of commands to send to a SEA
s.r.l. receiver to automatize the opening
and/or closing of doors, gates and leaves
Freq. 433.920 MHz (cod. 23110490/95)
and it must be supplied with safety tension (12Vdc battery 23A size) which will be waste in the provided
containers.
* Notice
: The useful capacity of this system (as that of all the systems which operate with radio frequency),
can change according to the entity of the electromagnetic pollution and of RF false signals in the
installation site, or of probable obstacles which are bewteen the radio transmitter and the related receiver.
SERVICING
The only servicing intervention to apply to this system is the battery substitution (see fig.1-2),
when there is an extreme capacity reduction or when it stops working. To obtain optimum performance it is
advisable to substitute the battery every two years.
PROGRAMMING PROCEDURE
1)
Press and keep pressed contemporaneously for at least 5 sec. the pushbuttons 1 and 2 of the radio
transmitter which has to be programmed (Fig. 3)
2)
When the led begins to blink rapidly release both pushbuttons.
3)
Within 8 sec. push and release the pushbutton on which you want to memorize the code (1,2, 3 or 4), the
led rests on with fixed light (Fig. 4).
4)
Now approach the radio transmitter which has to be cloned and press the relative pushbutton. The led
will blink twice to confirm the correct memorisation (Fig. 5).
5)
If necessary repeat this procedure for every pushbutton which has to be memorized.
NOTICE: THE MANUFACTURER CANNOT BE CONSIDERED RESPONSIBLE OF THE DAMAGES
CAUSED BY PRODUCT MISUSE.
SEA reserves the right to bring proper modifications or changes to its products and/or to this manual
without warning.
DECLARATION OF CONFORMITY
The following transmitters: ref.
,
433.920Mhz are in conformity with the 1999/5/CE
directive based on the standards: ETSI EN 301 489-3 v1.4.1; ETSI EN 301 489-1 v1.8.1; ETSI EN 300
220-2 v2.1.2; EN 60950-1. The user of this system must follow the norms in force in the country where it si
used.
23110490 23110495
Power Supply:
12Vdc (battery 23A size)
Absorption:
20 mA max (in trasmission)
Transmitting frequency: 433.920MHz
Capacity:
100 mt *
Code:
12 bit digital
N. of channels:
2 or 4
Working temperature: -20°C / +55°C
Storage temperature: -30°C / +80°C
Dimensions:
71 x 42 x 14 mm
Humidity:
from 5% to 90% not condensing
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
®
www.ReliableGateOpeners.com | (800) 878-7829 | [email protected]
