Sea-doo 2005 3D RFI Скачать руководство пользователя страница 106 | Manualshive

Страница: 106 / 123

Sea-doo 2005 3D RFI Скачать руководство пользователя страница 106

BRP NORTH AMERICA LIMITED WARRANTY: 2005
SEA-DOO

®

3D

TM

RFI

TM

PERSONAL WATERCRAFT

1. SCOPE

Bombardier Recreational Products Inc. (“BRP”)* warrants its model-year 2005
Sea-Doo 3D RFI personal watercraft from defects in material or workmanship for
the period and under the conditions described below.

All genuine BRP parts and accessories, installed by an authorized BRP dealer (as
hereinafter defined) at the time of delivery of the Sea-Doo personal watercraft,
carry the same warranty as that of the personal watercraft.

Use of the product for racing or any other competitive activity, at any point, even
by a prior owner, will render this warranty null and void.

2. WARRANTY COVERAGE DURATION

This warranty will be in effect from the date of delivery to the first retail consumer
or the date the product is first put into use, whichever occurs first and for a period
of:
a) TWELVE (12) CONSECUTIVE MONTHS for private use owners, except that

the emission related components providing input to emission control (see list
below) are covered for TWENTY-FOUR (24) CONSECUTIVE MONTHS OR 200
HOURS OF ENGINE USE whichever occurs first.

b) FOUR (4) CONSECUTIVE MONTHS for commercial use owners, except that

the emission related components providing input to emission control (see list
below) are covered for TWENTY-FOUR (24) CONSECUTIVE MONTHS OR 200
HOURS OF ENGINE USE whichever occurs first. A personal watercraft is
used commercially when it is used in connection with generating income or
any work or employment during any part of the warranty period. A personal
watercraft is also used commercially when, at any point during the warranty
period, it has commercial tags or is licensed for commercial use.

Emission Related Components:

Throttle Position Sensor (TPS)

Air Temperature Sensor (ATS)

Air Pressure Sensor (APS)

The repair or replacement of parts or the performance of service under this war-
ranty does not extend the life of this warranty beyond its original expiration date.

For Sea-Doo personal watercraft produced for sale in California, that are originally
sold in California to a California resident or subsequently warranty registered to a
California resident, please also refer to the applicable California Emissions Control
Warranty Statement.

_____________________

105

www.SeaDooManuals.net

«
...
104
105
106
107
108
...
»

Содержание 2005 3D RFI




























































































































Отзывы:

Нет отзывов