Sea-doo 2003 LRV DI Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 88

Sea-doo 2003 LRV DI Скачать руководство пользователя страница 44

42

Hull

Inspect hull for cracks or damage.

Jet Pump Water Intake

Remove weeds, shells, debris or any-
thing else that could restrict the flow
of water and damage cooling system
or propulsion unit. Clean as necessary.
If any obstruction can not be removed,
refer to an authorized SEA-DOO dealer
for servicing.

TYPICAL

1. Inspect this area

Inspect leading edges of the impeller,
if they have nicks or bends perfor-
mance will be greatly reduced.

Bilge

Should water be present in the bilge,
tilt the watercraft to the rear and un-
screw drain plugs to completely empty
the bilge.

Secure bilge drain plugs.

Battery

Fuel Tank and Oil Reservoir

With the watercraft horizontal, fill the
fuel tank to specified level.

Check the oil level and refill reservoir
as necessary.

Check fuel tank and oil reservoir retain-
ing straps/fasteners.

Engine Compartment

Steering System

Assisted by another person, check
steering operation for free movement.
When the handlebar is horizontal, the
jet pump nozzle should be in the straight
ahead position. Ensure the jet pump
nozzle pivots easily and in the same di-
rection as the handlebar.

WARNING

Make sure drain plugs are proper-
ly secured prior to launching the
watercraft in water.

F01J3ZY

1

WARNING

Verify tightness of battery cables to
their posts and condition of battery
retaining strap(s)/fasteners. Do not
charge or boost battery while in-
stalled.

WARNING

Should any leak or gasoline odor
be present, do not start the engine.
Refer to an authorized SEA-DOO
dealer before use.

WARNING

Check handlebar and correspond-
ing steering nozzle operation be-
fore starting.

smo2003-005a.book Page 42 Friday, November 1, 2002 8:25 AM

«
...
42
43
44
45
46
...
»

Содержание 2003 LRV DI

























































































Отзывы:

Нет отзывов