manualshive.com logo in svg

Sea-doo 2001 GS 5548, Руководство оператора, Страница: 15 / 100

Поделиться
Скачать
Sea-doo 2001 GS 5548 Скачать руководство пользователя страница 15

13

BOMBARDIER INTERNATIONAL LIMITED 
WARRANTY: SEA-DOO

®

 WATERCRAFT

1. WARRANTY COVERAGE PERIOD

BOMBARDIER INC. (“Bombardier”), as manufacturer, warrants FROM THE DATE
OF DELIVERY TO THE FIRST CONSUMER that each 2000 SEA-DOO watercraft
sold anywhere in the world except the United States and Canada, as NEW and
UNUSED and PREDELIVERED by an authorized SEA-DOO watercraft dealer, duly
appointed by an authorized SEA-DOO International Distributor, will be free from any
defects in material and/or workmanship for a PERIOD of:
TWELVE (12) CONSECUTIVE MONTHS, for private use owners, or
FOUR (4) CONSECUTIVE MONTHS for commercial use owners.
All genuine Bombardier accessories, installed by an authorized SEA-DOO dealer at
the time of delivery of the new and unused SEA-DOO watercraft, carry the same
Warranty Coverage Period as for the SEA-DOO watercraft.

2. WHAT BOMBARDIER WILL DO

BOMBARDIER through the local SEA-DOO International Distributor will, during the
Warranty Coverage Period, repair or replace, at its option, all genuine BOMBAR-
DIER part found defective in material and/or workmanship, under normal use, main-
tenance and service, with a genuine BOMBARDIER part without charge for parts
and labor, at any local authorized SEA-DOO dealer.

3. CONDITION TO HAVE WARRANTY WORK VALIDATED

The customer must notify a local authorized SEA-DOO dealer within two (2) days
of the appearance of the defect in material and/or workmanship and present to the
servicing authorized SEA-DOO watercraft dealer the SEA-DOO Warranty Registra-
tion Card or a proof of purchase of the NEW and UNUSED 2000 SEA-DOO water-
craft and must sign the repair/work order prior to the start of the repair in order to
validate a warranty repair. All parts replaced under this limited warranty become
the property of BOMBARDIER.

4. EXCLUSIONS - ARE NOT WARRANTED

• Normal wear and tear items;
• Labor, parts and lubricant costs of all maintenance services;
• Damage caused by failure to provide proper maintenance and/or storage, as

described in the “

2000 SEA-DOO Watercraft Operator’s Guide

”;

• Damage resulting from improper repairs, modifications or use of non-approved

parts or, repairs done by a non-authorized SEA-DOO dealer;

• Damage resulting from abuse, misuse, neglect, racing;
• Damage resulting from accident, fire, theft, vandalism or any act of God;
• Incidental or consequential damages, or damages of any kind such as, without

limitation, towing charges, telephone calls or taxi; 

• Water damages caused by water ingestion;
• Damage related to gel coat finish including but not limited to cosmetic gel coat

finish, blisters or fiberglass delamination caused by blisters, crazing, spyder or
hairline cracks; and

• Damages resulting from improper service or maintenance.

smo2001-002a.book  Page 13  Wednesday, June 7, 2000  3:57 PM

www.SeaDooManuals.net

Содержание 2001 GS 5548





































































































Отзывы:

Нет отзывов