E-8
1
2
Identification of Parts
CAUTION
Finder
Replacing the finder
This product comes equipped with a 0.66x pick-up finder. The finder can
be replaced with an optional finder unit so you can change the finder
magnification to match your shooting conditions.
Rotate the finder unit mounted on
the rear case in a counterclockwise
direction to remove it
=
The screw areas are coated in
grease, so be careful not to touch
them.
Rotate the replacement finder
unit in a clockwise direction to
attach it
=
Before attaching the finder, check to make sure that there is no dust, dirt,
or debris inside it.
=
When replacing the finder, do not touch the surface of the finder lens.
