REFLEXION FILTER® PRO
AS USE
Страница 1: ...REFLEXION FILTER PRO ASSEMBLY USE ...
Страница 2: ...re to the stand which is done by loosening the metal clamps a fitting the stand between them and tightening the key b for a secure fit If your stand s diameter is very large or very small you may have to adjust the large threaded nut c opposite the turning key to fit STEP TWO Next attach the support rod d to the filter by screwing it into the socket on the bottom edge e Tighten the nut using the w...
Страница 3: ...e by pushing the support rod down into its socket on the stand clamp f and tighten it in place with the turning key on the block g f g STEP FOUR Your microphone in a shockmount or a clip will attach to the hardware with the included standoff h The included adapter must be used for 5 8 US standard threaded mounts h ...
Страница 4: ...tle closer and some a little further away Once you ve found a good position for the mic and filter you can loosen the lever on top of the mic stand mount to move the filter and mic assembly forward or back this way you can position it so its center of gravity is balanced directly above the mic stand Thank you for being an sE customer enjoy your new Reflexion Filter For more information and to regi...