SDT FS.LBX.001, Руководство пользователя, Страница: 19 / 52

LUBExpert User Manual
19/52
7.2. Modifying a Database
7.2.1. Add Descriptive Tree Nodes
You may choose to add a descriptive node
or a measurement node. Descriptive nodes
serve to describe the location of the
physical asset.
Right click your mouse on any node in the
open database tree and select “Add New >
Tree Node” from the short
-cut menu. This
action opens the “Create New Tree Node”
dialogue box. Type the name of the new
Node and then click save. The new node is
added as a lower-level sub-Node of the
database or Node level you selected.
7.2.2. Add Measurement Tree Nodes
The last node in the tree (up to seven) is always used as the measurement node. Measurement
nodes describe the type of measurement data collected from the asset. UAS3 will only allow you to
assign Measurement Nodes in the correct place on the tree structure. If the “Measurement” op tion
is inactive then you have chosen, the wrong section of the tree to add a measurement.
Adding LUBExpert measurements to your data tree is no different than adding other measurements.
The only difference is that for a LUBExpert measurement, you only have two sensor choices
(LUBEsense1 and TEMP2).