SDT FS.LBX.001, Руководство пользователя, Страница: 11 / 52

LUBExpert User Manual
11/52
•
Acoustic lube adaptor
•
Sensor cable
•
Custom swivel cradle mounts LUBExpert to any standard grease gun
4.6. Upgrade Kit Contents
Article Code Description
FA.UKIT.R270.LBX LUBExpert Upgrade Kit for SDT270SU/DU
FAUPGRKEY270L Key Activation, LUBExpert
DMSDTNAUSB SDT USB Memory Drive (manuals, drivers, software)
FU.SEN.LUBE.001 LUBEsense1 Contact Sensor, Threaded, w/o Cable
FUCABLSPLE7LE7-3 Cable for Contact Sensor, LEMO to LEMO, Coiled
FUSEACMAG-01 Magnetic Base, Flat Surface
FUSEACMAG-02 Magnetic Base, Multi Surface
FUSEACLUBE-03 Acoustic Lube Adaptor
FU.LBX.DVC.001 Grease Gun Mounting Cradle
4.7. Charging the Battery
The LUBExpert uses an internal NiMH battery. The battery charger connects to a socket on the
bottom side of the Instrument, near the headphone jack.
The charging time is typically 6 hours. When the LED of the charger is continuously green, the
LUBExpert battery is completely charged.
Like most batteries, leaving the LUBExpert charging after the charger says it is charged does not hurt
the battery
– in fact, it very slowly tops the charge up a little more.
Expect up to 8 hours of continuous use from your LUBExpert when the battery is fully charged. This
will vary depending on your need to use the backlight and the TEMP1 internal temperature sensor.
Use the function settings in the main menu to adjust the auto power down and the delay to
automatically switch off the backlight.
Battery
Loader
Connector