SDT International SDT170, Руководство пользователя

Страница: 25 / 141

6. Using the SDT 170 MD
MAN.170.EN--04--SDT170-user-manual-Eng.docx 25/141
6.12 V
IEWING A PREVIOUS STORED VALUE
Selecting the route
1. Select the main menu with .
2. Select the line Select route with or
and push
.
3. Select the desired route with or
and push
.
4. Push
until to the main menu.
Selecting the point
To view a stored value in the data logger memory, proceed as follows:
1. From the main menu push .
2. With or , choose View data and push .
3. With or , choose, for the previously selected route, the point to
be displayed and push .
If exist, the recorded reading(s) is (are) displayed.
4. With or , choose one of these readings and push .
The data regarding the selected reading is displayed.
5. Push
until return to the measurement screen.
6.13 E
RASING A STORED VALUE
To erase a stored value in the data logger memory, proceed as follows:
1. From the main menu push .
2. With or , choose Erase data and push .
3. With or , choose, for the previously selected route, the point to
be erased and push .
If exist, the previous recorded reading(s) is (are) displayed.