SDS Cuspidor 1655, Установка, эксплуатация, обслуживание и устранение неисправностей

Страница: 4 / 24

Summit Dental Systems
Toll Free: (800) 275-3368
www.summitdental.com
Page 4 of 24
Important Information
Technical Specifications
Factory Pre-set Air Regulator Pressure: 80 PSI
Factory Pre-set Water Regulator Pressure: 40 PSI
Handpiece Pressure: 30-35 PSI (for most high-speed handpieces)
40-45 PSI (for most low-speed handpieces)
Unpacking
Pay careful attention when unpacking the cuspidor and its accessories. Damage
caused by mishandling the equipment during unpacking or installation is not
covered under warranty.
New Owner
Please read, sign and submit the warranty registration form that is located at the
end of this manual.
Failure to return this form may void the warranty.
Serial Number
Record this serial number in a convenient location. You will be
asked for this number when requesting service or warranty
information. (see drawing on next page for location of label).
Warning
SUMMIT DENTAL SYSTEMS
Ft, Lauderdale, FL USA
MODEL No:
SERIAL No:
PRODUCT:
VOLTS HERTZ AMPS
Medical Electrical Equipment needs special precautions regarding EMC and
needs to be installed and put into service according to the EMC information
provided in this manual.
Portable and mobile RF communications equipment can affect Medical
Electrical Equipment.
Attention
Manufacturer and
Serial Number
CE-mark Date of manufacture
Attention, consult
accompanying operation
instructions.