SDLG LG936, Руководство по эксплуатации и техническому обслуживанию, Страница: 23 / 122

Operation & Maintenance Manual ── LG936 Wheel Loader
13
equipment that may block the eyesight at the front and meanwhile the load is concentrated on the
back wheels.
z Be sure there is no big fog, soot or Sand-dust that
may block the eye sight.
z Examine the working area, the status of road
whether there is hole, block, slosh and ice.
z Understand the request of the operation; be sure to
understand meaning of the sign flag, signal, and label.
3.7 Prevention for Crushing or Cutting
z Do not enter, or put your hand or arm or other parts
of your body among movable parts such as
between working equipment and oil tank, machine
and working equipment or joint points between
front and rare frame. If the working equipment is
operated, the clearance will change and this may
lead to serious damage or personal injury when
stand too close. The engine must be OFF , the
working equipment is locked if people have to
work between the motion components.
z Make sure the supporter and the accessories are right. Do not use hydraulic tank for support. The
accessories may go down when there is leak of
hydraulic oil of control system of motion or
hydraulic tube.
z Don’t adjust the machine when the engine is
working unless there is notice.
z Be far away from any rotating and moving items.
z Make sure there is no sundry on the vane of engine.
Vane could shoot off or cut off the sundry, tools
that fall into.
z Check and maintain the engine when it is one is dangerous, which is not allowed.