manualshive.com logo in svg

SDKELI KS06 AOPD Series, Руководство по эксплуатации

Поделиться
Скачать
SDKELI KS06 AOPD Series Скачать руководство пользователя страница 7

 - 3 -

When the product's rating, performance, or structure changes, the product's specifications will change 

accordingly. For the change of product specifications, our company will not notify, if in doubt, please 
contact us.

(6)  Errors and Omissions
The contents of the manual have been made as accurate and complete as possible, but there is no 

guarantee that there are no errors or omissions in this manual.The Company shall not be responsible for 

any errors or omissions that may have occurred in this specification.

(7)  Copyright and Copy Permission 
This document shall not be copied for sales or promotions without permission.
This document is protected by copyright and is intended solely for use in conjunction with KS06 

light curtain. Please notify us before copying or reproducing this document in any manner, for any other 
purpose. If copying or transmitting this document to another, please copy or transmit it in its entirety.

Ⅲ . Precautions on safety

The following special information may appear at any place in the manual or on KS06 light curtain, as 

a warning of potential risk or promotion of special attention to information about clarifying or simplifying 
certain procedures.

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all 

safety messages that follow this symbol to avoid possible injury or death.

WARNING indicates an actual or potential risk or health hazard. 

They are designed to help you to prevent accidents. Read carefully 
and follow the warnings!

WARNING

CAUTION indicates the key information which, if not avoided, 

can result in expected legal dispute, or equipment damage.Read 
carefully and follow the cautions!

CAUTION

Содержание KS06 AOPD Series

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды