25
STEP 16: FRONT: FINAL LAYER
place a layer of 12mm minimum thick heat resistant material
on the exterior and finish.
step 17: hearth (floor proteCtor)
the hearth must be constructed from masonry or a non
combustible material, and must extend 500mm in front of
the appliance, 250mm on either side of the appliance and a
thickness of 75mm.
step 18: baffle plate
ensuring the wider end of the baffle plate is facing the inside
back wall of the firebox, and the flat surfaces are positioned
downwards, proceed to gently position the plate on the lugs
located on the inside ceiling of the firebox. Once in position
ensure the plate sits securely, the baffle plate should not rock
or shift when touched if placed correctly.
4.2
HeBel inStallation
