15
step 4: positioning of the unit
Place the firebox into position on top of the sheet metal.
Remember to leave a 25mm air gap on all sides of the firebox.
(if an outdoor air-kit is to be connected please leave a 125mm
air-gap at the rear of the firebox).
4.1
maSonry BricK inStallation
STEP 6: OUTDOOR AIR KIT
(if not reQuired go to step 7)
any depression or lack of fresh air within the room where the
fireplace is located can cause emanation of smoke to flow
back into the room and the unit to run inefficiently. It is highly
recommended that an outdoor air Kit be installed in six or more
star rated homes, or any install where a mechanical device (ie.
fan), takes air from the fireplace cavity & transfers it.
place the adaptor on the back of the unit and screw into
position. attach the flexi flue to the adaptor and run to the
external brick wall at the rear of the unit, then proceed to
connect the metal vermin proof cowl onto the outside wall.
the flexi flue can be positioned either side of the adaptor in
order to fit between the heater and the wall. It is not required
that the flexi flue be positioned directly behind the firebox.
step 5: lift up door assembly
(IF NOT REQUIRED GO TO STEP 6)
**iMPortant**
refer to images on page 37. liFt uP Door assEMBly.
three bolts mount the lift up door mechanism. it is
recommended that you use two solid pieces of timber
approximately 450mm long in order to assist in the assembly
of the door.
1. lift the door into position and place door lift mechanism in
position above fireplace door.
2. lift ballast and place timbers in-between guillotine
movement of slider to prevent ballast from coming back
down.
3. fix the 3 silver bolts into the heater frame through the
ballast frame
4. release weight from the wood when mechanism is secure
in place.
5. lift ballast and secure chains through sprocket onto the
small bolts attached to door (make sure spacers for chain
are inserted into link attached to door)
6. release weight from the wood when chain is secured on
both sides of door.
Door should now lift and lower with ease, please test this
before continuing.
