To prevent serious injury or death:
DO NOT step on or crush cable.
DO NOT pinch or sharply bend cable,
particularly where the cable connects
to the controller and to the console.
DO NOT jerk, knot, sharply bend or
otherwise abuse the cable.
DO NOT allow children or pets to play
with, or chew on, the cable.
ALWAYS pull on the console connector
when disconnecting the cable. DO NOT
pull on the cord.
Stop use immediately if Micro-USB
cable becomes damaged in any way.
To prevent potential trip or
entanglement hazards, locate cable so
people and pets are not likely to trip or
to accidentally pull on the cable if they
are near the controller and the
Xbox One™ system.
To prevent risk of electric shock,
damage, fire, serious injury or death:
DO NOT attempt to repair, open or modify
the controller in any way beyond
exchanging interchangeable components
discussed in this manual.
ONLY use SCUF® approved components
with your controller.
Micro-USB Cable
Use and Care of Your SCUF Controller
This device complies with Part 15 of
the FCC rules. Operation is subject to
the following two conditions:
a. This device must accept any
interference and
b. This device must accept any
interference received including
interference that may cause
undesired operation.
Changes or modification not expressly
approved by SCUF Gaming
International LLC could void the user’s
authority to operate the equipment.
When a controller is connected to
a computing device via USB cable,
the controller is a class B computer
peripheral.
Note: This equipment has been tested
and found to comply with the limits for
a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and can
FCC Compliance Statements
– Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
– Consult the dealer or an experienced
radio/TV technician for help.
To reduce the risk of fire or shock, do
not expose the device to water or other
type of moisture.
ONLY clean using a dry-cloth.
Cleaning
Before boarding any aircraft or packing
a wireless device in luggage that will be
checked, turn the wireless device off.
Wireless devices transmit Radio
Frequency (RF) energy when the device
is turned on.
Regulatory and Compliance Information
radiate radio frequency energy and,
if not installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there is
no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
– Reorient or relocate the receiving
antenna.
– Increase the separation between
the equipment and receiver.
WARNING
Wireless Devices aboard Aircraft.
CONTACT US & TECHNICAL SUPPORT
18